Re: Generate the config file for kernel compilation non-interactively in script.
From: Randy Dunlap
Date: Fri Jan 01 2021 - 01:39:10 EST
On 12/31/20 8:51 PM, Hongyi Zhao wrote:
> Hi,
>
> I want to build the realtime Linux for ROS 2 according to the
> guidelines here:
> <https://index.ros.org/doc/ros2/Tutorials/Building-Realtime-rt_preempt-kernel-for-ROS-2/>.
>
> For this purpose, I must enable the rt_preempt relative options in the
> kernel withe the following method interactively:
>
> $ make menuconfig
>
> and set the following
>
> # Enable CONFIG_PREEMPT_RT
> -> General Setup
> -> Preemption Model (Fully Preemptible Kernel (Real-Time))
> (X) Fully Preemptible Kernel (Real-Time)
>
> # Enable CONFIG_HIGH_RES_TIMERS
> -> General setup
> -> Timers subsystem
> [*] High Resolution Timer Support
>
> # Enable CONFIG_NO_HZ_FULL
> -> General setup
> -> Timers subsystem
> -> Timer tick handling (Full dynticks system (tickless))
> (X) Full dynticks system (tickless)
>
> # Set CONFIG_HZ_1000 (note: this is no longer in the General Setup
> menu, go back twice)
> -> Processor type and features
> -> Timer frequency (1000 HZ)
> (X) 1000 HZ
>
> # Set CPU_FREQ_DEFAULT_GOV_PERFORMANCE [=y]
> -> Power management and ACPI options
> -> CPU Frequency scaling
> -> CPU Frequency scaling (CPU_FREQ [=y])
> -> Default CPUFreq governor (<choice> [=y])
> (X) performance
>
> But this is very inconvenient for doing the above job in script. Is
> there an alternative method to generate the above configurations for
> kernel compilation non-interactively in script.
Hi,
You can use scripts/config in the kernel source tree.
Something like this (I don't have RT kernel sources):
scripts/config -e PREEMPT_RT
scripts/config -e HIGH_RES_TIMERS
scripts/config -e NO_HZ_FULL
scripts/config -e HZ_1000
scripts/config -e CPU_FREQ_DEFAULT_GOV_PERFORMANCE
Note that if any of those have other Kconfig dependencies, those Kconfig
symbols will also have to be enabled for this to work.
And then run 'make oldconfig' to update the kernel .config file.
HTH.
--
~Randy