[PATCH] Input: ar1021 - use IRQ_NOAUTOEN flags to replace disable_irq

From: Barry Song
Date: Sat Jan 02 2021 - 00:15:07 EST


disable_irq() after request_irq is unsafe as it gives a time gap which
irq can come before disable_irq(). IRQ_NOAUTOEN is the common way to
avoid enabling IRQ due to requesting IRQ.

Signed-off-by: Barry Song <song.bao.hua@xxxxxxxxxxxxx>
---
drivers/input/touchscreen/ar1021_i2c.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
index c0d5c2413356..c9e98ed4520e 100644
--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -123,6 +123,11 @@ static int ar1021_i2c_probe(struct i2c_client *client,

input_set_drvdata(input, ar1021);

+ /*
+ * Don't enable the IRQ automatically, we'll enable it in
+ * ar1021_i2c_open()
+ */
+ irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, ar1021_i2c_irq,
IRQF_ONESHOT,
@@ -133,9 +138,6 @@ static int ar1021_i2c_probe(struct i2c_client *client,
return error;
}

- /* Disable the IRQ, we'll enable it in ar1021_i2c_open() */
- disable_irq(client->irq);
-
error = input_register_device(ar1021->input);
if (error) {
dev_err(&client->dev,
--
2.25.1