[PATCH 2/2] watchdog: BD70528: conditionally allow BD70528 module

[Matti Vaittinen]

The BD70528 watchdog module provides start/stop interface for RTC
driver because the BD70528 watchdog must be stopped when RTC time
is set. (WDG uses RTC counter and setting RTC may accidentally trigger
WDG if WDG is enabled). The BD71828 use same RTC driver as BD70528 but
don't share same WDG logic. When BD70528 is not configured a stub call
to "stop WDG" is implemented and in case when BD71828 is used, this
stub function should be called. Prevent configuring in the BD70528
watchdog when BD71828 is configured to avoid access to real WDG
functions when WDG does not exist in HW.

Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
---
 drivers/watchdog/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fd7968635e6d..40e1b4c69537 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -163,6 +163,7 @@ config SOFT_WATCHDOG_PRETIMEOUT
 config BD70528_WATCHDOG
 	tristate "ROHM BD70528 PMIC Watchdog"
 	depends on MFD_ROHM_BD70528
+	depends on MFD_ROHM_BD71828 = n
 	select WATCHDOG_CORE
 	help
 	  Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]