[PATCH net 1/2] net: ipa: introduce atomic channel STOPPING flag

From: Alex Elder
Date: Thu Jan 07 2021 - 16:44:13 EST


Introduce a new atomic flag bit to communicate that a channel is
stopping. At the end of the NAPI poll loop, we normally re-enable
the IEOB interrupt, but now we won't do that if the channel is being
stopped. This is required for the next patch.

Fixes: 650d1603825d8 ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
drivers/net/ipa/gsi.c | 11 ++++++++++-
drivers/net/ipa/gsi.h | 6 ++++++
2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 14d9a791924bf..7e7629902911e 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -739,6 +739,10 @@ static void gsi_channel_freeze(struct gsi_channel *channel)
{
gsi_channel_trans_quiesce(channel);

+ /* Don't let the NAPI poll loop re-enable interrupts when done */
+ set_bit(GSI_CHANNEL_FLAG_STOPPING, channel->flags);
+ smp_mb__after_atomic(); /* Ensure gsi_channel_poll() sees new value */
+
napi_disable(&channel->napi);

gsi_irq_ieob_disable(channel->gsi, channel->evt_ring_id);
@@ -749,6 +753,10 @@ static void gsi_channel_thaw(struct gsi_channel *channel)
{
gsi_irq_ieob_enable(channel->gsi, channel->evt_ring_id);

+ /* Allow the NAPI poll loop to re-enable interrupts again */
+ clear_bit(GSI_CHANNEL_FLAG_STOPPING, channel->flags);
+ smp_mb__after_atomic(); /* Ensure gsi_channel_poll() sees new value */
+
napi_enable(&channel->napi);
}

@@ -1536,7 +1544,8 @@ static int gsi_channel_poll(struct napi_struct *napi, int budget)

if (count < budget) {
napi_complete(&channel->napi);
- gsi_irq_ieob_enable(channel->gsi, channel->evt_ring_id);
+ if (!test_bit(GSI_CHANNEL_FLAG_STOPPING, channel->flags))
+ gsi_irq_ieob_enable(channel->gsi, channel->evt_ring_id);
}

return count;
diff --git a/drivers/net/ipa/gsi.h b/drivers/net/ipa/gsi.h
index 96c9aed397aad..8f0ae97c80c6e 100644
--- a/drivers/net/ipa/gsi.h
+++ b/drivers/net/ipa/gsi.h
@@ -104,9 +104,15 @@ enum gsi_channel_state {
GSI_CHANNEL_STATE_ERROR = 0xf,
};

+enum gsi_channel_flag {
+ GSI_CHANNEL_FLAG_STOPPING,
+ GSI_CHANNEL_FLAG_COUNT, /* Last; not a flag */
+};
+
/* We only care about channels between IPA and AP */
struct gsi_channel {
struct gsi *gsi;
+ DECLARE_BITMAP(flags, GSI_CHANNEL_FLAG_COUNT);
bool toward_ipa;
bool command; /* AP command TX channel or not */

--
2.20.1