Re: [PATCH] dmaengine: qcom: bam_dma: Add LOCK and UNLOCK flag bit support

[mdalam]

On 2021-01-15 11:28, Vinod Koul wrote:
> On 14-01-21, 01:20, mdalam@xxxxxxxxxxxxxx wrote:
> > On 2021-01-12 15:40, Vinod Koul wrote:
> > > On 12-01-21, 15:01, mdalam@xxxxxxxxxxxxxx wrote:
> > > > On 2020-12-21 23:03, mdalam@xxxxxxxxxxxxxx wrote:
> > > > > On 2020-12-21 14:53, Vinod Koul wrote:
> > > > > > Hello,
> > > > > >
> > > > > > On 17-12-20, 20:07, Md Sadre Alam wrote:
> > > > > > > This change will add support for LOCK & UNLOCK flag bit support
> > > > > > > on CMD descriptor.
> > > > > > >
> > > > > > > If DMA_PREP_LOCK flag passed in prep_slave_sg then requester of this
> > > > > > > transaction wanted to lock the DMA controller for this transaction so
> > > > > > > BAM driver should set LOCK bit for the HW descriptor.
> > > > > > >
> > > > > > > If DMA_PREP_UNLOCK flag passed in prep_slave_sg then requester
> > > > > > > of this
> > > > > > > transaction wanted to unlock the DMA controller.so BAM driver
> > > > > > > should set
> > > > > > > UNLOCK bit for the HW descriptor.
> > > > > >
> > > > > > Can you explain why would we need to first lock and then unlock..? How
> > > > > > would this be used in real world.
> > > > > >
> > > > > > I have read a bit of documentation but is unclear to me. Also should
> > > > > > this be exposed as an API to users, sounds like internal to driver..?
> > > > > >
> > > > >
> > > > > IPQ5018 SoC having only one Crypto Hardware Engine. This Crypto Hardware
> > > > > Engine
> > > > > will be shared between A53 core & ubi32 core. There is two separate
> > > > > driver dedicated
> > > > > to A53 core and ubi32 core. So to use Crypto Hardware Engine
> > > > > parallelly for encryption/description
> > > > > we need bam locking mechanism. if one driver will submit the request
> > > > > for encryption/description
> > > > > to Crypto then first it has to set LOCK flag bit on command descriptor
> > > > > so that other pipes will
> > > > > get locked.
> > > > >
> > > > > The Pipe Locking/Unlocking will be only on command-descriptor. Upon
> > > > > encountering a command descriptor
> > >
> > > Can you explain what is a cmd descriptor?
> >
> >   In BAM pipe descriptor structure there is a field called CMD 
> > (Command
> > descriptor).
> >   CMD allows the SW to create descriptors of type Command which does 
> > not
> > generate any data transmissions
> >   but configures registers in the Peripheral (write operations, and 
> > read
> > registers operations ).
> >   Using command descriptor enables the SW to queue new configurations
> > between data transfers in advance.
>
> What and when is the CMD descriptor used for..?

  CMD descriptor is mainly used for configuring controller register.
  We can read/write controller register via BAM using CMD descriptor 
only.
  CMD descriptor use command pipe for the transaction.
> > >
> > > > > with LOCK bit set, The BAM will lock all other pipes not related to
> > > > > the current pipe group, and keep
> > > > > handling the current pipe only until it sees the UNLOCK set then it
> > > > > will release all locked pipes.
> > > > > locked pipe will not fetch new descriptors even if it got event/events
> > > > > adding more descriptors for
> > > > > this pipe (locked pipe).
> > > > >
> > > > > No need to expose as an API to user because its internal to driver, so
> > > > > while preparing command descriptor
> > > > > just we have to update the LOCK/UNLOCK flag.
> > >
> > > So IIUC, no api right? it would be internal to driver..?
> >
> >   Yes its totally internal to deriver.
>
> So no need for this patch then, right?

  This patch is needed , because if some hardware will shared between 
multiple core
  like A53 and ubi32 for example. In IPQ5018 there is only one crypto 
engine and this will
  be shared between A53 core and ubi32 core and in A53 core & ubi32 core 
there are different
  drivers is getting used. So if encryption/decryption request come at 
same time from both the
  driver then things will get messed up. So here we need LOCKING 
mechanism. If first request is
  from A53 core driver then this driver should lock all the pipes other 
than pipe dedicated to
  A53 core. So while preparing CMD descriptor driver should used this 
flag "DMA_PREP_LOCK",
  Since LOCK and UNLOCK flag bit we can set only on CMD descriptor. Once 
request processed then
  driver will set UNLOCK flag on CMD descriptor. Driver should use this 
flag "DMA_PREP_UNLOCK"
  while preparing CMD descriptor. Same logic will be apply for ubi32 
core driver as well.