[PATCH] Bluetooth: btrtl: Enable WBS for the specific Realtek devices

[max.chou]

From: Max Chou <max.chou@xxxxxxxxxxx>

By this change, it will enable WBS supported on the specific Realtek BT
devices, such as RTL8822C and RTL8852A.
In the future, it's able to maintain what the Realtek devices support WBS
here.

Tested-by: Hilda Wu <hildawu@xxxxxxxxxxx>
Signed-off-by: Max Chou <max.chou@xxxxxxxxxxx>
---
 drivers/bluetooth/btrtl.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 24f03a1f8d57..835819c47ae6 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,6 +38,19 @@
 	.hci_ver = (hciv), \
 	.hci_bus = (bus)
 
+enum  btrtl_chip_id {
+	CHIP_ID_8723A,		/* index  0 for RTL8723A*/
+	CHIP_ID_8723B,		/* index  1 for RTL8723B*/
+	CHIP_ID_8821A,		/* index  2 for RTL8821A*/
+	CHIP_ID_8761A,		/* index  3 for RTL8761A*/
+	CHIP_ID_8822B = 8,	/* index  8 for RTL8822B */
+	CHIP_ID_8723D,		/* index  9 for RTL8723D */
+	CHIP_ID_8821C,		/* index 10 for RTL8821C */
+	CHIP_ID_8822C = 13,	/* index 13 for RTL8822C */
+	CHIP_ID_8761B,		/* index 14 for RTL8761B */
+	CHIP_ID_8852A = 18,	/* index 18 for RTL8852A */
+};
+
 struct id_table {
 	__u16 match_flags;
 	__u16 lmp_subver;
@@ -58,6 +71,7 @@ struct btrtl_device_info {
 	u8 *cfg_data;
 	int cfg_len;
 	bool drop_fw;
+	int project_id;
 };
 
 static const struct id_table ic_id_table[] = {
@@ -307,8 +321,10 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 
 	/* Find project_id in table */
 	for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
-		if (project_id == project_id_to_lmp_subver[i].id)
+		if (project_id == project_id_to_lmp_subver[i].id) {
+			btrtl_dev->project_id = project_id;
 			break;
+		}
 	}
 
 	if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
@@ -725,12 +741,16 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
 	/* Enable central-peripheral role (able to create new connections with
 	 * an existing connection in slave role).
 	 */
-	switch (btrtl_dev->ic_info->lmp_subver) {
-	case RTL_ROM_LMP_8822B:
+	/* Enable WBS supported for the specific Realtek devices. */
+	switch (btrtl_dev->project_id) {
+	case CHIP_ID_8822C:
+	case CHIP_ID_8852A:
 		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
 		break;
 	default:
 		rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
+		rtl_dev_dbg(hdev, "WBS supported not enabled.");
 		break;
 	}
 
-- 
2.17.1