Re: [PATCH v2 00/15] drm/vc4: hdmi: Add CEC support for the BCM2711

From: Hans Verkuil
Date: Mon Jan 18 2021 - 08:57:57 EST


On 12/01/2021 16:24, Hans Verkuil wrote:
> Hi Maxime,
>
> On 11/01/2021 15:22, Maxime Ripard wrote:
>> Hi,
>>
>> Here's a series introducing the CEC support for the BCM2711 found on the
>> RaspberryPi4.
>>
>> The BCM2711 HDMI controller uses a similar layout for the CEC registers, the
>> main difference being that the interrupt handling part is now shared between
>> both HDMI controllers.
>>
>> This series is mainly about fixing a couple of bugs, reworking the driver to
>> support having two different interrupts, one for each direction, provided by an
>> external irqchip, and enables the irqchip driver for the controller we have.
>>
>> This has been tested on an RPi3 and RPi4, but requires the latest firmware.
>> It's is based on the 10 and 12 bpc series.
>
> Thank you for this series, I plan to test this later this week.

Testing is delayed: my microHDMI to HDMI adapter has problems with the CEC pin
(possibly not connected at all). I've ordered adapter cables (hopefully of better
quality), but those haven't arrived yet. I expect them later this week.

Regards,

Hans

>
> Regards,
>
> Hans
>
>>
>> Here is the cec-compliance output:
>>
>> pi@raspberrypi:~$ cec-ctl --tuner -p 1.0.0.0
>> The CEC adapter doesn't allow setting the physical address manually, ignore this option.
>>
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : 1.0.0.0
>> Logical Address Mask : 0x0008
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Tuner
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : 3 (Tuner 1)
>> Primary Device Type : Tuner
>> Logical Address Type : Tuner
>> All Device Types : Tuner
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> pi@raspberrypi:~$ cec-compliance
>> cec-compliance SHA : not available
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : 1.0.0.0
>> Logical Address Mask : 0x0008
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Tuner
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : 3 (Tuner 1)
>> Primary Device Type : Tuner
>> Logical Address Type : Tuner
>> All Device Types : Tuner
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> Compliance test for device /dev/cec0:
>>
>> The test results mean the following:
>> OK Supported correctly by the device.
>> OK (Not Supported) Not supported and not mandatory for the device.
>> OK (Presumed) Presumably supported. Manually check to confirm.
>> OK (Unexpected) Supported correctly but is not expected to be supported for this device.
>> OK (Refused) Supported by the device, but was refused.
>> FAIL Failed and was expected to be supported by this device.
>>
>> Find remote devices:
>> Polling: OK
>>
>> Network topology:
>> System Information for device 0 (TV) from device 3 (Tuner 1):
>> CEC Version : 2.0
>> Physical Address : 0.0.0.0
>> Primary Device Type : TV
>> Vendor ID : 0x000c03
>> OSD Name : 'TV '
>> Power Status : Tx, OK, Rx, OK, Feature Abort
>>
>> Total: 1, Succeeded: 1, Failed: 0, Warnings: 0
>>
>> pi@raspberrypi:~$ cec-ctl -d1 --tuner -p 1.0.0.0
>> The CEC adapter doesn't allow setting the physical address manually, ignore this option.
>>
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : 1.0.0.0
>> Logical Address Mask : 0x0008
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Tuner
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : 3 (Tuner 1)
>> Primary Device Type : Tuner
>> Logical Address Type : Tuner
>> All Device Types : Tuner
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> pi@raspberrypi:~$ cec-compliance -d1
>> cec-compliance SHA : not available
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : 1.0.0.0
>> Logical Address Mask : 0x0008
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Tuner
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : 3 (Tuner 1)
>> Primary Device Type : Tuner
>> Logical Address Type : Tuner
>> All Device Types : Tuner
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> Compliance test for device /dev/cec1:
>>
>> The test results mean the following:
>> OK Supported correctly by the device.
>> OK (Not Supported) Not supported and not mandatory for the device.
>> OK (Presumed) Presumably supported. Manually check to confirm.
>> OK (Unexpected) Supported correctly but is not expected to be supported for this device.
>> OK (Refused) Supported by the device, but was refused.
>> FAIL Failed and was expected to be supported by this device.
>>
>> Find remote devices:
>> Polling: OK
>>
>> Network topology:
>> System Information for device 0 (TV) from device 3 (Tuner 1):
>> CEC Version : 2.0
>> Physical Address : 0.0.0.0
>> Primary Device Type : TV
>> Vendor ID : 0x000c03
>> OSD Name : 'TV '
>> Power Status : Tx, OK, Rx, OK, Feature Abort
>>
>> Total: 1, Succeeded: 1, Failed: 0, Warnings: 0
>>
>> And for the hotplug detect test:
>>
>> pi@raspberrypi:~$ cec-ctl --playback
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : f.f.f.f
>> Logical Address Mask : 0x0000
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Playback
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : Not Allocated
>> Primary Device Type : Playback
>> Logical Address Type : Playback
>> All Device Types : Playback
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> pi@raspberrypi:~$ cec-ctl -t0 --image-view-on
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : f.f.f.f
>> Logical Address Mask : 0x0000
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Playback
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : Not Allocated
>> Primary Device Type : Playback
>> Logical Address Type : Playback
>> All Device Types : Playback
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> Transmit from Unregistered to TV (15 to 0):
>> CEC_MSG_IMAGE_VIEW_ON (0x04)
>> Sequence: 1 Tx Timestamp: 9182.611s
>> pi@raspberrypi:~$ cec-ctl -d1 --playback
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : f.f.f.f
>> Logical Address Mask : 0x0000
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Playback
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : Not Allocated
>> Primary Device Type : Playback
>> Logical Address Type : Playback
>> All Device Types : Playback
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> pi@raspberrypi:~$ cec-ctl -d1 -t0 --image-view-on
>> Driver Info:
>> Driver Name : vc4_hdmi
>> Adapter Name : vc4
>> Capabilities : 0x0000010e
>> Logical Addresses
>> Transmit
>> Passthrough
>> Driver version : 5.10.0
>> Available Logical Addresses: 1
>> Physical Address : f.f.f.f
>> Logical Address Mask : 0x0000
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : Playback
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : Not Allocated
>> Primary Device Type : Playback
>> Logical Address Type : Playback
>> All Device Types : Playback
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> Transmit from Unregistered to TV (15 to 0):
>> CEC_MSG_IMAGE_VIEW_ON (0x04)
>> Sequence: 1 Tx Timestamp: 9207.191s
>>
>> With the pulse-eight side reporting:
>>
>> $ sudo cec-ctl -M
>> Driver Info:
>> Driver Name : pulse8-cec
>> Adapter Name : serio0
>> Capabilities : 0x0000003f
>> Physical Address
>> Logical Addresses
>> Transmit
>> Passthrough
>> Remote Control Support
>> Monitor All
>> Driver version : 5.9.16
>> Available Logical Addresses: 1
>> Connector Info : None
>> Physical Address : 0.0.0.0
>> Logical Address Mask : 0x0001
>> CEC Version : 2.0
>> Vendor ID : 0x000c03 (HDMI)
>> OSD Name : 'TV '
>> Logical Addresses : 1 (Allow RC Passthrough)
>>
>> Logical Address : 0 (TV)
>> Primary Device Type : TV
>> Logical Address Type : TV
>> All Device Types : TV
>> RC TV Profile : None
>> Device Features :
>> None
>>
>> Initial Event: State Change: PA: 0.0.0.0, LA mask: 0x0001, Conn Info: no
>>
>> Received from Unregistered to TV (15 to 0): IMAGE_VIEW_ON (0x04)
>> Received from Unregistered to TV (15 to 0): IMAGE_VIEW_ON (0x04)
>>
>> Let me know what you think,
>> Maxime
>>
>> Changes from v1:
>> - Removed the irqchip patch in favor of a select in mach-bcm
>> - Fixed HDMI1 interrupt numbers
>> - Removed redundant call to drm_connector_update_edid_property
>> - Fixed the condition in vc4_hdmi_connector_detect
>> - Added the tags
>> - Rebased on top of drm-misc-next-2021-01-06
>>
>> Dom Cobley (5):
>> drm/vc4: hdmi: Move hdmi reset to bind
>> drm/vc4: hdmi: Fix register offset with longer CEC messages
>> drm/vc4: hdmi: Fix up CEC registers
>> drm/vc4: hdmi: Restore cec physical address on reconnect
>> drm/vc4: hdmi: Remove cec_available flag
>>
>> Maxime Ripard (10):
>> ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
>> drm/vc4: hdmi: Compute the CEC clock divider from the clock rate
>> drm/vc4: hdmi: Update the CEC clock divider on HSM rate change
>> drm/vc4: hdmi: Introduce a CEC clock
>> drm/vc4: hdmi: Split the interrupt handlers
>> drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
>> drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts
>> dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
>> ARM: dts: bcm2711: Add the BSC interrupt controller
>> ARM: dts: bcm2711: Add the CEC interrupt controller
>>
>> .../bindings/display/brcm,bcm2711-hdmi.yaml | 20 +-
>> arch/arm/boot/dts/bcm2711.dtsi | 30 +++
>> arch/arm/mach-bcm/Kconfig | 1 +
>> arch/arm64/Kconfig.platforms | 1 +
>> drivers/gpu/drm/vc4/vc4_hdmi.c | 223 ++++++++++++++----
>> drivers/gpu/drm/vc4/vc4_hdmi.h | 11 +-
>> drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 4 +-
>> 7 files changed, 234 insertions(+), 56 deletions(-)
>>
>