Re: [PATCH 3/3] arm64: dts: rockchip: rename thermal subnodes for rk3399.dtsi

[Robin Murphy]

On 2021-01-17 15:09, Johan Jonker wrote:
> A test with the command below gives for example this error:
> /arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml:
> thermal-zones: 'cpu', 'gpu' do not match any of the regexes:
> '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
>
> Rename Rockchip rk3399 thermal subnodes so that it ends
> with "-thermal"
>
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/
> thermal/thermal-zones.yaml
>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
>   arch/arm64/boot/dts/rockchip/rk3399-rock960.dts | 2 +-
>   arch/arm64/boot/dts/rockchip/rk3399.dtsi        | 4 ++--
>   2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> index c88295782..b20774081 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
> @@ -126,7 +126,7 @@
>   };
>   
>   &thermal_zones {
> -	cpu_thermal: cpu {
> +	cpu_thermal: cpu-thermal {
>   		polling-delay-passive = <100>;
>   		polling-delay = <1000>;
>   		thermal-sensors = <&tsadc 0>;

Passing observation: why is this DT not just referencing &cpu_thermal 
directly to add the board-specific parts (and not repeat all the SoC 
default properties) anyway? Cleaning the whole thing up might have been 
a good idea :/

Robin.

> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 4e94b7ebd..3de493ad6 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -761,7 +761,7 @@
>   	};
>   
>   	thermal_zones: thermal-zones {
> -		cpu_thermal: cpu {
> +		cpu_thermal: cpu-thermal {
>   			polling-delay-passive = <100>;
>   			polling-delay = <1000>;
>   
> @@ -805,7 +805,7 @@
>   			};
>   		};
>   
> -		gpu_thermal: gpu {
> +		gpu_thermal: gpu-thermal {
>   			polling-delay-passive = <100>;
>   			polling-delay = <1000>;
>