Re: [PATCH v1 5/5] driver core: Set fw_devlink=on by default

From: Geert Uytterhoeven
Date: Mon Jan 18 2021 - 14:23:09 EST


Hi Marc,

On Mon, Jan 18, 2021 at 6:59 PM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> On 2021-01-18 17:39, Geert Uytterhoeven wrote:
> > On Fri, Dec 18, 2020 at 4:34 AM Saravana Kannan <saravanak@xxxxxxxxxx>
> > wrote:
> >> Cyclic dependencies in some firmware was one of the last remaining
> >> reasons fw_devlink=on couldn't be set by default. Now that cyclic
> >> dependencies don't block probing, set fw_devlink=on by default.
> >>
> >> Setting fw_devlink=on by default brings a bunch of benefits
> >> (currently,
> >> only for systems with device tree firmware):
> >> * Significantly cuts down deferred probes.
> >> * Device probe is effectively attempted in graph order.
> >> * Makes it much easier to load drivers as modules without having to
> >> worry about functional dependencies between modules (depmod is still
> >> needed for symbol dependencies).
> >>
> >> If this patch prevents some devices from probing, it's very likely due
> >> to the system having one or more device drivers that "probe"/set up a
> >> device (DT node with compatible property) without creating a struct
> >> device for it. If we hit such cases, the device drivers need to be
> >> fixed so that they populate struct devices and probe them like normal
> >> device drivers so that the driver core is aware of the devices and
> >> their
> >> status. See [1] for an example of such a case.
> >>
> >> [1] -
> >> https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@xxxxxxxxxxxxxx/
> >> Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> >
> > Shimoda-san reported that next-20210111 and later fail to boot
> > on Renesas R-Car Gen3 platforms. No output is seen, unless earlycon
> > is enabled.
> >
> > I have bisected this to commit e590474768f1cc04 ("driver core: Set
> > fw_devlink=on by default").
>
> There is a tentative patch from Saravana here[1], which works around
> some issues on my RK3399 platform, and it'd be interesting to find
> out whether that helps on your system.
>
> Thanks,
>
> M.
>
> [1]
> https://lore.kernel.org/r/20210116011412.3211292-1-saravanak@xxxxxxxxxx

Thanks for the suggestion, but given no devices probe (incl. GPIO
providers), I'm afraid it won't help. [testing] Indeed.

With the debug prints in device_links_check_suppliers enabled, and
some postprocessing, I get:

255 supplier e6180000.system-controller not ready
9 supplier fe990000.iommu not ready
9 supplier fe980000.iommu not ready
6 supplier febd0000.iommu not ready
6 supplier ec670000.iommu not ready
3 supplier febe0000.iommu not ready
3 supplier e7740000.iommu not ready
3 supplier e6740000.iommu not ready
3 supplier e65ee000.usb-phy not ready
3 supplier e6570000.iommu not ready
3 supplier e6054000.gpio not ready
3 supplier e6053000.gpio not ready

As everything is part of a PM Domain, the (lack of the) system controller
must be the culprit. What's wrong with it? It is registered very early in
the boot:

[ 0.142096] rcar_sysc_pd_init:442: of_genpd_add_provider_onecell() returned 0

Thanks!

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds