[PATCH v4 10/21] staging: hikey9xx: hi6421v600-regulator: fix delay logic

From: Mauro Carvalho Chehab
Date: Tue Jan 19 2021 - 11:14:23 EST

The original driver, which can be seen at
commit 42f24d9d446a ("staging: regulator: add a regulator driver for HiSilicon 6421v600 SPMI PMIC")
had a complex logic to ensure that there won't be multiple power
enable/disable commands running at the same time. At the original
logic, it were ensured that:

- a next power up/down would wait for at least the on/off period;
- an extra delay would be granted. It turns that such extra delay
has a value of zero, but it was relying on gettimeofday()
call, which can take some time.

This was later simplified, but there are still some possible
issues. In order to avoid that, let's simply add a delay
to wait for the power up line to stabilize after powering up
a device.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
drivers/staging/hikey9xx/hi6421v600-regulator.c | 5 +++--
include/linux/mfd/hi6421-spmi-pmic.h | 1 -
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/hikey9xx/hi6421v600-regulator.c b/drivers/staging/hikey9xx/hi6421v600-regulator.c
index 5e78eebfc1f3..e5a492ee7121 100644
--- a/drivers/staging/hikey9xx/hi6421v600-regulator.c
+++ b/drivers/staging/hikey9xx/hi6421v600-regulator.c
@@ -113,14 +113,15 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)

/* cannot enable more than one regulator at one time */

/* set enable register */
ret = hi6421_spmi_pmic_rmw(pmic, rdev->desc->enable_reg,

+ /* Avoid powering up multiple devices at the same time */
+ usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);

return ret;
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 2c8896fd852e..0c2214612c4e 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -13,7 +13,6 @@

#include <linux/irqdomain.h>

-#define HISI_REGS_ENA_PROTECT_TIME (0) /* in microseconds */