Re: [PATCH v6 02/15] clk: tegra: Don't enable PLLE HW sequencer at init

[Thierry Reding]

On Tue, Jan 19, 2021 at 04:55:33PM +0800, JC Kuo wrote:
> PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
> power sequencers' output to enable/disable PLLE. PLLE hardware power
> sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
> are enabled.
> 
> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> v6:
>    no change
> v5:
>    no change
> v4:
>    no change 
> v3:
>    no change
> 
>  drivers/clk/tegra/clk-pll.c | 12 ------------
>  1 file changed, 12 deletions(-)

Michael, Stephen,

here's patch 2 of the hardware sequencer series that would need an
Acked-by so that it can go through a different tree.

Thanks,
Thierry

> 
> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> index c5cc0a2dac6f..0193cebe8c5a 100644
> --- a/drivers/clk/tegra/clk-pll.c
> +++ b/drivers/clk/tegra/clk-pll.c
> @@ -2515,18 +2515,6 @@ static int clk_plle_tegra210_enable(struct clk_hw *hw)
>  	pll_writel(val, PLLE_SS_CTRL, pll);
>  	udelay(1);
>  
> -	val = pll_readl_misc(pll);
> -	val &= ~PLLE_MISC_IDDQ_SW_CTRL;
> -	pll_writel_misc(val, pll);
> -
> -	val = pll_readl(pll->params->aux_reg, pll);
> -	val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SS_SEQ_INCLUDE);
> -	val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
> -	pll_writel(val, pll->params->aux_reg, pll);
> -	udelay(1);
> -	val |= PLLE_AUX_SEQ_ENABLE;
> -	pll_writel(val, pll->params->aux_reg, pll);
> -
>  out:
>  	if (pll->lock)
>  		spin_unlock_irqrestore(pll->lock, flags);
> -- 
> 2.25.1
>

Attachment: signature.asc
Description: PGP signature