[PATCH] regulator: remove ab3100 driver

From: Arnd Bergmann
Date: Wed Jan 20 2021 - 10:19:13 EST

From: Arnd Bergmann <arnd@xxxxxxxx>

The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/regulator/Kconfig | 9 -
drivers/regulator/Makefile | 1 -
drivers/regulator/ab3100.c | 724 -------------------------------------
3 files changed, 734 deletions(-)
delete mode 100644 drivers/regulator/ab3100.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 53fa84f4d1e1..ae287ea6fe11 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -122,15 +122,6 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.

-config REGULATOR_AB3100
- tristate "ST-Ericsson AB3100 Regulator functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- These regulators correspond to functionality in the
- AB3100 analog baseband dealing with power regulators
- for the system.
-
config REGULATOR_AB8500
bool "ST-Ericsson AB8500 Power Regulators"
depends on AB8500_CORE
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 680e539f6579..fa449dee90b8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
deleted file mode 100644
index a544f45efe53..000000000000
--- a/drivers/regulator/ab3100.c
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/regulator/ab3100.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Low-level control of the AB3100 IC Low Dropout (LDO)
- * regulators, external regulator and buck converter
- * Author: Mattias Wallin <mattias.wallin@xxxxxxxxxxxxxx>
- * Author: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/mfd/abx500.h>
-#include <linux/of.h>
-#include <linux/regulator/of_regulator.h>
-
-/* LDO registers and some handy masking definitions for AB3100 */
-#define AB3100_LDO_A 0x40
-#define AB3100_LDO_C 0x41
-#define AB3100_LDO_D 0x42
-#define AB3100_LDO_E 0x43
-#define AB3100_LDO_E_SLEEP 0x44
-#define AB3100_LDO_F 0x45
-#define AB3100_LDO_G 0x46
-#define AB3100_LDO_H 0x47
-#define AB3100_LDO_H_SLEEP_MODE 0
-#define AB3100_LDO_H_SLEEP_EN 2
-#define AB3100_LDO_ON 4
-#define AB3100_LDO_H_VSEL_AC 5
-#define AB3100_LDO_K 0x48
-#define AB3100_LDO_EXT 0x49
-#define AB3100_BUCK 0x4A
-#define AB3100_BUCK_SLEEP 0x4B
-#define AB3100_REG_ON_MASK 0x10
-
-/**
- * struct ab3100_regulator
- * A struct passed around the individual regulator functions
- * @platform_device: platform device holding this regulator
- * @dev: handle to the device
- * @plfdata: AB3100 platform data passed in at probe time
- * @regreg: regulator register number in the AB3100
- */
-struct ab3100_regulator {
- struct device *dev;
- struct ab3100_platform_data *plfdata;
- u8 regreg;
-};
-
-/* The order in which registers are initialized */
-static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
- AB3100_LDO_A,
- AB3100_LDO_C,
- AB3100_LDO_E,
- AB3100_LDO_E_SLEEP,
- AB3100_LDO_F,
- AB3100_LDO_G,
- AB3100_LDO_H,
- AB3100_LDO_K,
- AB3100_LDO_EXT,
- AB3100_BUCK,
- AB3100_BUCK_SLEEP,
- AB3100_LDO_D,
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static const unsigned int ldo_e_buck_typ_voltages[] = {
- 1800000,
- 1400000,
- 1300000,
- 1200000,
- 1100000,
- 1050000,
- 900000,
-};
-
-static const unsigned int ldo_f_typ_voltages[] = {
- 1800000,
- 1400000,
- 1300000,
- 1200000,
- 1100000,
- 1050000,
- 2500000,
- 2650000,
-};
-
-static const unsigned int ldo_g_typ_voltages[] = {
- 2850000,
- 2750000,
- 1800000,
- 1500000,
-};
-
-static const unsigned int ldo_h_typ_voltages[] = {
- 2750000,
- 1800000,
- 1500000,
- 1200000,
-};
-
-static const unsigned int ldo_k_typ_voltages[] = {
- 2750000,
- 1800000,
-};
-
-
-/* The regulator devices */
-static struct ab3100_regulator
-ab3100_regulators[AB3100_NUM_REGULATORS] = {
- {
- .regreg = AB3100_LDO_A,
- },
- {
- .regreg = AB3100_LDO_C,
- },
- {
- .regreg = AB3100_LDO_D,
- },
- {
- .regreg = AB3100_LDO_E,
- },
- {
- .regreg = AB3100_LDO_F,
- },
- {
- .regreg = AB3100_LDO_G,
- },
- {
- .regreg = AB3100_LDO_H,
- },
- {
- .regreg = AB3100_LDO_K,
- },
- {
- .regreg = AB3100_LDO_EXT,
- /* No voltages for the external regulator */
- },
- {
- .regreg = AB3100_BUCK,
- },
-};
-
-/*
- * General functions for enable, disable and is_enabled used for
- * LDO: A,C,E,F,G,H,K,EXT and BUCK
- */
-static int ab3100_enable_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- int err;
- u8 regval;
-
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_warn(&reg->dev, "failed to get regid %d value\n",
- abreg->regreg);
- return err;
- }
-
- /* The regulator is already on, no reason to go further */
- if (regval & AB3100_REG_ON_MASK)
- return 0;
-
- regval |= AB3100_REG_ON_MASK;
-
- err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
- regval);
- if (err) {
- dev_warn(&reg->dev, "failed to set regid %d value\n",
- abreg->regreg);
- return err;
- }
-
- return 0;
-}
-
-static int ab3100_disable_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- int err;
- u8 regval;
-
- /*
- * LDO D is a special regulator. When it is disabled, the entire
- * system is shut down. So this is handled specially.
- */
- pr_info("Called ab3100_disable_regulator\n");
- if (abreg->regreg == AB3100_LDO_D) {
- dev_info(&reg->dev, "disabling LDO D - shut down system\n");
- /* Setting LDO D to 0x00 cuts the power to the SoC */
- return abx500_set_register_interruptible(abreg->dev, 0,
- AB3100_LDO_D, 0x00U);
- }
-
- /*
- * All other regulators are handled here
- */
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_err(&reg->dev, "unable to get register 0x%x\n",
- abreg->regreg);
- return err;
- }
- regval &= ~AB3100_REG_ON_MASK;
- return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
- regval);
-}
-
-static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
- &regval);
- if (err) {
- dev_err(&reg->dev, "unable to get register 0x%x\n",
- abreg->regreg);
- return err;
- }
-
- return regval & AB3100_REG_ON_MASK;
-}
-
-static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- /*
- * For variable types, read out setting and index into
- * supplied voltage list.
- */
- err = abx500_get_register_interruptible(abreg->dev, 0,
- abreg->regreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator value in register %02x\n",
- abreg->regreg);
- return err;
- }
-
- /* The 3 highest bits index voltages */
- regval &= 0xE0;
- regval >>= 5;
-
- if (regval >= reg->desc->n_voltages) {
- dev_err(&reg->dev,
- "regulator register %02x contains an illegal voltage setting\n",
- abreg->regreg);
- return -EINVAL;
- }
-
- return reg->desc->volt_table[regval];
-}
-
-static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
- unsigned selector)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
-
- err = abx500_get_register_interruptible(abreg->dev, 0,
- abreg->regreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator register %02x\n",
- abreg->regreg);
- return err;
- }
-
- /* The highest three bits control the variable regulators */
- regval &= ~0xE0;
- regval |= (selector << 5);
-
- err = abx500_set_register_interruptible(abreg->dev, 0,
- abreg->regreg, regval);
- if (err)
- dev_warn(&reg->dev, "failed to set regulator register %02x\n",
- abreg->regreg);
-
- return err;
-}
-
-static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
- int uV)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
- u8 regval;
- int err;
- int bestindex;
- u8 targetreg;
-
- if (abreg->regreg == AB3100_LDO_E)
- targetreg = AB3100_LDO_E_SLEEP;
- else if (abreg->regreg == AB3100_BUCK)
- targetreg = AB3100_BUCK_SLEEP;
- else
- return -EINVAL;
-
- /* LDO E and BUCK have special suspend voltages you can set */
- bestindex = regulator_map_voltage_iterate(reg, uV, uV);
-
- err = abx500_get_register_interruptible(abreg->dev, 0,
- targetreg, &regval);
- if (err) {
- dev_warn(&reg->dev,
- "failed to get regulator register %02x\n",
- targetreg);
- return err;
- }
-
- /* The highest three bits control the variable regulators */
- regval &= ~0xE0;
- regval |= (bestindex << 5);
-
- err = abx500_set_register_interruptible(abreg->dev, 0,
- targetreg, regval);
- if (err)
- dev_warn(&reg->dev, "failed to set regulator register %02x\n",
- abreg->regreg);
-
- return err;
-}
-
-/*
- * The external regulator can just define a fixed voltage.
- */
-static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
-{
- struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-
- if (abreg->plfdata)
- return abreg->plfdata->external_voltage;
- else
- /* TODO: encode external voltage into device tree */
- return 0;
-}
-
-static const struct regulator_ops regulator_ops_fixed = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
-};
-
-static const struct regulator_ops regulator_ops_variable = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
- .set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .list_voltage = regulator_list_voltage_table,
-};
-
-static const struct regulator_ops regulator_ops_variable_sleepable = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
- .set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
- .list_voltage = regulator_list_voltage_table,
-};
-
-/*
- * LDO EXT is an external regulator so it is really
- * not possible to set any voltage locally here, AB3100
- * is an on/off switch plain an simple. The external
- * voltage is defined in the board set-up if any.
- */
-static const struct regulator_ops regulator_ops_external = {
- .enable = ab3100_enable_regulator,
- .disable = ab3100_disable_regulator,
- .is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator_external,
-};
-
-static const struct regulator_desc
-ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
- {
- .name = "LDO_A",
- .id = AB3100_LDO_A,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_A_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_C",
- .id = AB3100_LDO_C,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_C_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_D",
- .id = AB3100_LDO_D,
- .ops = &regulator_ops_fixed,
- .n_voltages = 1,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .fixed_uV = LDO_D_VOLTAGE,
- .enable_time = 200,
- },
- {
- .name = "LDO_E",
- .id = AB3100_LDO_E,
- .ops = &regulator_ops_variable_sleepable,
- .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
- .volt_table = ldo_e_buck_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_F",
- .id = AB3100_LDO_F,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
- .volt_table = ldo_f_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 600,
- },
- {
- .name = "LDO_G",
- .id = AB3100_LDO_G,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
- .volt_table = ldo_g_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 400,
- },
- {
- .name = "LDO_H",
- .id = AB3100_LDO_H,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
- .volt_table = ldo_h_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_K",
- .id = AB3100_LDO_K,
- .ops = &regulator_ops_variable,
- .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
- .volt_table = ldo_k_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 200,
- },
- {
- .name = "LDO_EXT",
- .id = AB3100_LDO_EXT,
- .ops = &regulator_ops_external,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "BUCK",
- .id = AB3100_BUCK,
- .ops = &regulator_ops_variable_sleepable,
- .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
- .volt_table = ldo_e_buck_typ_voltages,
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- .enable_time = 1000,
- },
-};
-
-static int ab3100_regulator_register(struct platform_device *pdev,
- struct ab3100_platform_data *plfdata,
- struct regulator_init_data *init_data,
- struct device_node *np,
- unsigned long id)
-{
- const struct regulator_desc *desc;
- struct ab3100_regulator *reg;
- struct regulator_dev *rdev;
- struct regulator_config config = { };
- int err, i;
-
- for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
- desc = &ab3100_regulator_desc[i];
- if (desc->id == id)
- break;
- }
- if (desc->id != id)
- return -ENODEV;
-
- /* Same index used for this array */
- reg = &ab3100_regulators[i];
-
- /*
- * Initialize per-regulator struct.
- * Inherit platform data, this comes down from the
- * i2c boarddata, from the machine. So if you want to
- * see what it looks like for a certain machine, go
- * into the machine I2C setup.
- */
- reg->dev = &pdev->dev;
- if (plfdata) {
- reg->plfdata = plfdata;
- config.init_data = &plfdata->reg_constraints[i];
- } else if (np) {
- config.of_node = np;
- config.init_data = init_data;
- }
- config.dev = &pdev->dev;
- config.driver_data = reg;
-
- rdev = devm_regulator_register(&pdev->dev, desc, &config);
- if (IS_ERR(rdev)) {
- err = PTR_ERR(rdev);
- dev_err(&pdev->dev,
- "%s: failed to register regulator %s err %d\n",
- __func__, desc->name,
- err);
- return err;
- }
-
- return 0;
-}
-
-static struct of_regulator_match ab3100_regulator_matches[] = {
- { .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
- { .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
- { .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
- { .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
- { .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
- { .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
- { .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
- { .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
- { .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
- { .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
-};
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING 0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING 0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING 0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING 0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING 0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING 0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING 0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING 0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING 0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING 0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING 0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING 0xAC
-
-static const u8 ab3100_reg_initvals[] = {
- LDO_A_SETTING,
- LDO_C_SETTING,
- LDO_E_SETTING,
- LDO_E_SLEEP_SETTING,
- LDO_F_SETTING,
- LDO_G_SETTING,
- LDO_H_SETTING,
- LDO_K_SETTING,
- LDO_EXT_SETTING,
- BUCK_SETTING,
- BUCK_SLEEP_SETTING,
- LDO_D_SETTING,
-};
-
-static int
-ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
-{
- int err, i;
-
- /*
- * Set up the regulator registers, as was previously done with
- * platform data.
- */
- /* Set up regulators */
- for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
- err = abx500_set_register_interruptible(&pdev->dev, 0,
- ab3100_reg_init_order[i],
- ab3100_reg_initvals[i]);
- if (err) {
- dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
- err);
- return err;
- }
- }
-
- for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
- err = ab3100_regulator_register(
- pdev, NULL, ab3100_regulator_matches[i].init_data,
- ab3100_regulator_matches[i].of_node,
- (unsigned long)ab3100_regulator_matches[i].driver_data);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-
-static int ab3100_regulators_probe(struct platform_device *pdev)
-{
- struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
- struct device_node *np = pdev->dev.of_node;
- int err = 0;
- u8 data;
- int i;
-
- /* Check chip state */
- err = abx500_get_register_interruptible(&pdev->dev, 0,
- AB3100_LDO_D, &data);
- if (err) {
- dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
- return err;
- }
- if (data & 0x10)
- dev_notice(&pdev->dev,
- "chip is already in active mode (Warm start)\n");
- else
- dev_notice(&pdev->dev,
- "chip is in inactive mode (Cold start)\n");
-
- if (np) {
- err = of_regulator_match(&pdev->dev, np,
- ab3100_regulator_matches,
- ARRAY_SIZE(ab3100_regulator_matches));
- if (err < 0) {
- dev_err(&pdev->dev,
- "Error parsing regulator init data: %d\n", err);
- return err;
- }
- return ab3100_regulator_of_probe(pdev, np);
- }
-
- /* Set up regulators */
- for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
- err = abx500_set_register_interruptible(&pdev->dev, 0,
- ab3100_reg_init_order[i],
- plfdata->reg_initvals[i]);
- if (err) {
- dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
- err);
- return err;
- }
- }
-
- /* Register the regulators */
- for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
- const struct regulator_desc *desc = &ab3100_regulator_desc[i];
-
- err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
- desc->id);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static struct platform_driver ab3100_regulators_driver = {
- .driver = {
- .name = "ab3100-regulators",
- },
- .probe = ab3100_regulators_probe,
-};
-
-static __init int ab3100_regulators_init(void)
-{
- return platform_driver_register(&ab3100_regulators_driver);
-}
-
-static __exit void ab3100_regulators_exit(void)
-{
- platform_driver_unregister(&ab3100_regulators_driver);
-}
-
-subsys_initcall(ab3100_regulators_init);
-module_exit(ab3100_regulators_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@xxxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("AB3100 Regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ab3100-regulators");
--
2.29.2