[PATCH 5/5] watchdog: remove coh901 driver

From: Arnd Bergmann
Date: Wed Jan 20 2021 - 11:32:40 EST

From: Arnd Bergmann <arnd@xxxxxxxx>

The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
.../watchdog/stericsson-coh901327.txt | 19 -
drivers/watchdog/Kconfig | 11 -
drivers/watchdog/Makefile | 1 -
drivers/watchdog/coh901327_wdt.c | 408 ------------------
4 files changed, 439 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
delete mode 100644 drivers/watchdog/coh901327_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
deleted file mode 100644
index 8ffb88e39e76..000000000000
--- a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-ST-Ericsson COH 901 327 Watchdog timer
-
-Required properties:
-- compatible: must be "stericsson,coh901327".
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: the interrupt used for the watchdog timeout warning.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-Example:
-
-watchdog: watchdog@c0012000 {
- compatible = "stericsson,coh901327";
- reg = <0xc0012000 0x1000>;
- interrupts = <3>;
- timeout-sec = <60>;
-};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 10efbb351f14..3b73735b0c8b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -619,17 +619,6 @@ config SUNXI_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called sunxi_wdt.

-config COH901327_WATCHDOG
- bool "ST-Ericsson COH 901 327 watchdog"
- depends on ARCH_U300 || (ARM && COMMON_CLK && COMPILE_TEST)
- default y if MACH_U300
- select WATCHDOG_CORE
- help
- Say Y here to include Watchdog timer support for the
- watchdog embedded into the ST-Ericsson U300 series platforms.
- This watchdog is used to reset the system and thus cannot be
- compiled as a module.
-
config NPCM7XX_WATCHDOG
tristate "Nuvoton NPCM750 watchdog"
depends on ARCH_NPCM || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 1ff40d6a027f..1685dbc70a15 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -61,7 +61,6 @@ obj-$(CONFIG_K3_RTI_WATCHDOG) += rti_wdt.o
obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
-obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_NPCM7XX_WATCHDOG) += npcm_wdt.o
obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
deleted file mode 100644
index 260c50b08483..000000000000
--- a/drivers/watchdog/coh901327_wdt.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * coh901327_wdt.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
- * Author: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
- */
-#include <linux/moduleparam.h>
-#include <linux/mod_devicetable.h>
-#include <linux/types.h>
-#include <linux/watchdog.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-
-#define DRV_NAME "WDOG COH 901 327"
-
-/*
- * COH 901 327 register definitions
- */
-
-/* WDOG_FEED Register 32bit (-/W) */
-#define U300_WDOG_FR 0x00
-#define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
-/* WDOG_TIMEOUT Register 32bit (R/W) */
-#define U300_WDOG_TR 0x04
-#define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
-/* WDOG_DISABLE1 Register 32bit (-/W) */
-#define U300_WDOG_D1R 0x08
-#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
-/* WDOG_DISABLE2 Register 32bit (R/W) */
-#define U300_WDOG_D2R 0x0C
-#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
-#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
-#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
-/* WDOG_STATUS Register 32bit (R/W) */
-#define U300_WDOG_SR 0x10
-#define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
-#define U300_WDOG_SR_STATUS_NORMAL 0x0000U
-#define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
-/* WDOG_COUNT Register 32bit (R/-) */
-#define U300_WDOG_CR 0x14
-#define U300_WDOG_CR_VALID_IND 0x8000U
-#define U300_WDOG_CR_VALID_STABLE 0x0000U
-#define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
-/* WDOG_JTAGOVR Register 32bit (R/W) */
-#define U300_WDOG_JOR 0x18
-#define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
-#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
-/* WDOG_RESTART Register 32bit (-/W) */
-#define U300_WDOG_RR 0x1C
-#define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
-/* WDOG_IRQ_EVENT Register 32bit (R/W) */
-#define U300_WDOG_IER 0x20
-#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
-#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
-/* WDOG_IRQ_MASK Register 32bit (R/W) */
-#define U300_WDOG_IMR 0x24
-#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
-/* WDOG_IRQ_FORCE Register 32bit (R/W) */
-#define U300_WDOG_IFR 0x28
-#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
-
-/* Default timeout in seconds = 1 minute */
-#define U300_WDOG_DEFAULT_TIMEOUT 60
-
-static unsigned int margin;
-static int irq;
-static void __iomem *virtbase;
-static struct device *parent;
-
-static struct clk *clk;
-
-/*
- * Enabling and disabling functions.
- */
-static void coh901327_enable(u16 timeout)
-{
- u16 val;
- unsigned long freq;
- unsigned long delay_ns;
-
- /* Restart timer if it is disabled */
- val = readw(virtbase + U300_WDOG_D2R);
- if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
- writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
- virtbase + U300_WDOG_RR);
- /* Acknowledge any pending interrupt so it doesn't just fire off */
- writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
- virtbase + U300_WDOG_IER);
- /*
- * The interrupt is cleared in the 32 kHz clock domain.
- * Wait 3 32 kHz cycles for it to take effect
- */
- freq = clk_get_rate(clk);
- delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
- delay_ns = 3 * delay_ns; /* Wait 3 cycles */
- ndelay(delay_ns);
- /* Enable the watchdog interrupt */
- writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
- /* Activate the watchdog timer */
- writew(timeout, virtbase + U300_WDOG_TR);
- /* Start the watchdog timer */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
- /*
- * Extra read so that this change propagate in the watchdog.
- */
- (void) readw(virtbase + U300_WDOG_CR);
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
- dev_err(parent,
- "%s(): watchdog not enabled! D2R value %04x\n",
- __func__, val);
-}
-
-static void coh901327_disable(void)
-{
- u16 val;
-
- /* Disable the watchdog interrupt if it is active */
- writew(0x0000U, virtbase + U300_WDOG_IMR);
- /* If the watchdog is currently enabled, attempt to disable it */
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
- writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
- virtbase + U300_WDOG_D1R);
- writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
- virtbase + U300_WDOG_D2R);
- /* Write this twice (else problems occur) */
- writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
- virtbase + U300_WDOG_D2R);
- }
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
- dev_err(parent,
- "%s(): watchdog not disabled! D2R value %04x\n",
- __func__, val);
-}
-
-static int coh901327_start(struct watchdog_device *wdt_dev)
-{
- coh901327_enable(wdt_dev->timeout * 100);
- return 0;
-}
-
-static int coh901327_stop(struct watchdog_device *wdt_dev)
-{
- coh901327_disable();
- return 0;
-}
-
-static int coh901327_ping(struct watchdog_device *wdd)
-{
- /* Feed the watchdog */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- return 0;
-}
-
-static int coh901327_settimeout(struct watchdog_device *wdt_dev,
- unsigned int time)
-{
- wdt_dev->timeout = time;
- /* Set new timeout value */
- writew(time * 100, virtbase + U300_WDOG_TR);
- /* Feed the dog */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- return 0;
-}
-
-static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev)
-{
- u16 val;
-
- /* Read repeatedly until the value is stable! */
- val = readw(virtbase + U300_WDOG_CR);
- while (val & U300_WDOG_CR_VALID_IND)
- val = readw(virtbase + U300_WDOG_CR);
- val &= U300_WDOG_CR_COUNT_VALUE_MASK;
- if (val != 0)
- val /= 100;
-
- return val;
-}
-
-/*
- * This interrupt occurs 10 ms before the watchdog WILL bark.
- */
-static irqreturn_t coh901327_interrupt(int irq, void *data)
-{
- u16 val;
-
- /*
- * Ack IRQ? If this occurs we're FUBAR anyway, so
- * just acknowledge, disable the interrupt and await the imminent end.
- * If you at some point need a host of callbacks to be called
- * when the system is about to watchdog-reset, add them here!
- *
- * NOTE: on future versions of this IP-block, it will be possible
- * to prevent a watchdog reset by feeding the watchdog at this
- * point.
- */
- val = readw(virtbase + U300_WDOG_IER);
- if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
- writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
- virtbase + U300_WDOG_IER);
- writew(0x0000U, virtbase + U300_WDOG_IMR);
- dev_crit(parent, "watchdog is barking!\n");
- return IRQ_HANDLED;
-}
-
-static const struct watchdog_info coh901327_ident = {
- .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = DRV_NAME,
-};
-
-static const struct watchdog_ops coh901327_ops = {
- .owner = THIS_MODULE,
- .start = coh901327_start,
- .stop = coh901327_stop,
- .ping = coh901327_ping,
- .set_timeout = coh901327_settimeout,
- .get_timeleft = coh901327_gettimeleft,
-};
-
-static struct watchdog_device coh901327_wdt = {
- .info = &coh901327_ident,
- .ops = &coh901327_ops,
- /*
- * Max timeout is 327 since the 10ms
- * timeout register is max
- * 0x7FFF = 327670ms ~= 327s.
- */
- .min_timeout = 1,
- .max_timeout = 327,
- .timeout = U300_WDOG_DEFAULT_TIMEOUT,
-};
-
-static int __init coh901327_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- int ret;
- u16 val;
-
- parent = dev;
-
- virtbase = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(virtbase))
- return PTR_ERR(virtbase);
-
- clk = clk_get(dev, NULL);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- dev_err(dev, "could not get clock\n");
- return ret;
- }
- ret = clk_prepare_enable(clk);
- if (ret) {
- dev_err(dev, "could not prepare and enable clock\n");
- goto out_no_clk_enable;
- }
-
- val = readw(virtbase + U300_WDOG_SR);
- switch (val) {
- case U300_WDOG_SR_STATUS_TIMED_OUT:
- dev_info(dev, "watchdog timed out since last chip reset!\n");
- coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
- /* Status will be cleared below */
- break;
- case U300_WDOG_SR_STATUS_NORMAL:
- dev_info(dev, "in normal status, no timeouts have occurred.\n");
- break;
- default:
- dev_info(dev, "contains an illegal status code (%08x)\n", val);
- break;
- }
-
- val = readw(virtbase + U300_WDOG_D2R);
- switch (val) {
- case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
- dev_info(dev, "currently disabled.\n");
- break;
- case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
- dev_info(dev, "currently enabled! (disabling it now)\n");
- coh901327_disable();
- break;
- default:
- dev_err(dev, "contains an illegal enable/disable code (%08x)\n",
- val);
- break;
- }
-
- /* Reset the watchdog */
- writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
-
- irq = platform_get_irq(pdev, 0);
- if (request_irq(irq, coh901327_interrupt, 0,
- DRV_NAME " Bark", pdev)) {
- ret = -EIO;
- goto out_no_irq;
- }
-
- watchdog_init_timeout(&coh901327_wdt, margin, dev);
-
- coh901327_wdt.parent = dev;
- ret = watchdog_register_device(&coh901327_wdt);
- if (ret)
- goto out_no_wdog;
-
- dev_info(dev, "initialized. (timeout=%d sec)\n",
- coh901327_wdt.timeout);
- return 0;
-
-out_no_wdog:
- free_irq(irq, pdev);
-out_no_irq:
- clk_disable_unprepare(clk);
-out_no_clk_enable:
- clk_put(clk);
- return ret;
-}
-
-#ifdef CONFIG_PM
-
-static u16 wdogenablestore;
-static u16 irqmaskstore;
-
-static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
-{
- irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
- wdogenablestore = readw(virtbase + U300_WDOG_D2R);
- /* If watchdog is on, disable it here and now */
- if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
- coh901327_disable();
- return 0;
-}
-
-static int coh901327_resume(struct platform_device *pdev)
-{
- /* Restore the watchdog interrupt */
- writew(irqmaskstore, virtbase + U300_WDOG_IMR);
- if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
- /* Restart the watchdog timer */
- writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
- virtbase + U300_WDOG_RR);
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- }
- return 0;
-}
-#else
-#define coh901327_suspend NULL
-#define coh901327_resume NULL
-#endif
-
-/*
- * Mistreating the watchdog is the only way to perform a software reset of the
- * system on EMP platforms. So we implement this and export a symbol for it.
- */
-void coh901327_watchdog_reset(void)
-{
- /* Enable even if on JTAG too */
- writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
- virtbase + U300_WDOG_JOR);
- /*
- * Timeout = 5s, we have to wait for the watchdog reset to
- * actually take place: the watchdog will be reloaded with the
- * default value immediately, so we HAVE to reboot and get back
- * into the kernel in 30s, or the device will reboot again!
- * The boot loader will typically deactivate the watchdog, so we
- * need time enough for the boot loader to get to the point of
- * deactivating the watchdog before it is shut down by it.
- *
- * NOTE: on future versions of the watchdog, this restriction is
- * gone: the watchdog will be reloaded with a default value (1 min)
- * instead of last value, and you can conveniently set the watchdog
- * timeout to 10ms (value = 1) without any problems.
- */
- coh901327_enable(500);
- /* Return and await doom */
-}
-
-static const struct of_device_id coh901327_dt_match[] = {
- { .compatible = "stericsson,coh901327" },
- {},
-};
-
-static struct platform_driver coh901327_driver = {
- .driver = {
- .name = "coh901327_wdog",
- .of_match_table = coh901327_dt_match,
- .suppress_bind_attrs = true,
- },
- .suspend = coh901327_suspend,
- .resume = coh901327_resume,
-};
-builtin_platform_driver_probe(coh901327_driver, coh901327_probe);
-
-/* not really modular, but ... */
-module_param(margin, uint, 0);
-MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
--
2.29.2