Re: [PATCH v3] USB: serial: cp210x: Fix error 32 when hardware flow control is enabled.

[gregkh@xxxxxxxxxxxxxxxxxxx]

On Thu, Jan 21, 2021 at 07:09:13AM +0000, Pho Tran wrote:
> Fix error 32 returned by CP210X_SET_MHS when hardware flow control is enabled.
> 
> The root cause of error 32 is that user application (CoolTerm, linux-serial-test)
> opened cp210x device with hardware flow control then attempt to control RTS/DTR pins.
> In hardware flow control, RTS/DTR pins will be controlled by hardware only,
> any attempt to control those pins will cause error 32 from the device.
> This fix will block MHS command(command to control RTS/DTR pins) to the device
> if hardware flow control is being used.
> 
> Signed-off-by: Pho Tran <pho.tran@xxxxxxxxxx>
> ---
> 01/19/2021: Patch v2  Modified based on comment from Johan Hovold <johan@xxxxxxxxxx>
> and Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/serial/cp210x.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index fbb10dfc56e3..5b6bbda2b424 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -1204,7 +1204,12 @@ static int cp210x_tiocmset(struct tty_struct *tty,
>  		unsigned int set, unsigned int clear)
>  {
>  	struct usb_serial_port *port = tty->driver_data;
> -	return cp210x_tiocmset_port(port, set, clear);
> +	if (C_CRTSCTS(tty))
> +
> +	/* Don't send SET_MHS command if device in hardware flow control mode. */
> +		return 0;

That indentation and whitespace is very odd.  Did you run checkpatch.pl
on your change before sending it to us to verify that all is ok?

Please do so.

thanks,

greg k-h