[PATCH v4 0/2] Realtek RTL838x/RTL839x interrupt controller driver

[Bert Vermeulen]

v4:
- Disable cascaded interrupts before mapping, not after.
- Set chained handlers as interrupt mappings are read, instead of beforehand.
- Removed timer interrupt clear.

v3:
- Fixed syntax and maxItems problems in DT bindings.

v2:
- Addressed all comments by Marc Zyngier.
- Moved interrupt routing symbols to device tree interrupt-map. Parsing
  is done similar to the renesas,rza1-irqc driver.


Bert Vermeulen (2):
  dt-bindings: interrupt-controller: Add Realtek RTL838x/RTL839x support
  irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller

 .../realtek,rtl-intc.yaml                     |  57 ++++++
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-realtek-rtl.c             | 180 ++++++++++++++++++
 3 files changed, 238 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
 create mode 100644 drivers/irqchip/irq-realtek-rtl.c

-- 
2.25.1