[PATCH 5.10 003/199] mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine

[Greg Kroah-Hartman]

From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

commit 3c97be6982e689d7b2430187a11f8c78e573abdb upstream.

I have been fooled by the logic picking the right ECC engine which is
spread across two functions: *init_module() and *_attach(). I thought
this driver was not impacted by the recent changes around the ECC
engines DT parsing logic but in fact it is.

Reported-by: kernel test robot <oliver.sang@xxxxxxxxx>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Link: https://lore.kernel.org/linux-mtd/20210104093057.31178-1-miquel.raynal@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mtd/nand/raw/nandsim.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2211,6 +2211,9 @@ static int ns_attach_chip(struct nand_ch
 {
 	unsigned int eccsteps, eccbytes;
 
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = bch ? NAND_ECC_ALGO_BCH : NAND_ECC_ALGO_HAMMING;
+
 	if (!bch)
 		return 0;
 
@@ -2234,8 +2237,6 @@ static int ns_attach_chip(struct nand_ch
 		return -EINVAL;
 	}
 
-	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-	chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	chip->ecc.size = 512;
 	chip->ecc.strength = bch;
 	chip->ecc.bytes = eccbytes;
@@ -2274,8 +2275,6 @@ static int __init ns_init_module(void)
 	nsmtd       = nand_to_mtd(chip);
 	nand_set_controller_data(chip, (void *)ns);
 
-	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-	chip->ecc.algo   = NAND_ECC_ALGO_HAMMING;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
 	/* and 'badblocks' parameters to work */
 	chip->options   |= NAND_SKIP_BBTSCAN;