Re: [PATCH v2 00/12] arm64: dts: zynqmp: DT updates to match latest drivers

[Michal Simek]

On 1/21/21 11:26 AM, Michal Simek wrote:
> Hi,
> 
> I am sending this series to reflect the latest drivers which have been
> merged to mainline kernel. I have boot it on zcu102-rev1.0 and also
> zcu104-rev1.0. That's why I have also added DT for this newer revision.
> 
> The series is based on https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt.
> And mio-bank patch requires update in dt-binding which has been posted here
> https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xxxxxxxxxx
> 
> Thanks,
> Michal
> 
> Changes in v2:
> - Remove reset description for IPs from this patch. IPs will be enabled
>   separately with DT binding update.
> - Change patch subject
> 
> Michal Simek (12):
>   arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
>   arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
>   arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
>   arm64: dts: zynqmp: Enable reset controller driver
>   arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
>   arm64: dts: zynqmp: Add label for zynqmp_ipi
>   arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
>   arm64: dts: zynqmp: Wire arasan nand controller
>   arm64: dts: zynqmp: Wire zynqmp qspi controller
>   arm64: dts: zynqmp: Add missing lpd watchdog node
>   arm64: dts: zynqmp: Add missing iommu IDs
>   arm64: dts: zynqmp: Add description for zcu104 revC
> 
>  arch/arm64/boot/dts/xilinx/Makefile           |   1 +
>  .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  12 +
>  .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |   2 +
>  .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  84 +++++-
>  .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  29 ++
>  .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    | 282 ++++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  78 +++++
>  .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  59 +++-
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  94 +++++-
>  9 files changed, 637 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
> 

Applied all.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs