Re: [PATCH 3/6] soundwire: qcom: set continue execution flag for ignored commands
From: Vinod Koul
Date: Mon Feb 01 2021 - 09:17:31 EST
On 29-01-21, 17:32, Srinivas Kandagatla wrote:
> version 1.5.1 and higher IPs of this controller required to set
> continue execution on ingored command flag. This patch sets this flag.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> drivers/soundwire/qcom.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index da6e0d4e9622..3669bac11a32 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -40,6 +40,7 @@
> #define SWRM_CMD_FIFO_CMD 0x308
> #define SWRM_CMD_FIFO_STATUS 0x30C
> #define SWRM_CMD_FIFO_CFG_ADDR 0x314
> +#define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31)
> #define SWRM_RD_WR_CMD_RETRIES 0x7
> #define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318
> #define SWRM_ENUMERATOR_CFG_ADDR 0x500
> @@ -345,7 +346,16 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
> ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
>
> /* Configure number of retries of a read/write cmd */
> - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES);
> + if (ctrl->version_major == 1 && ctrl->version_minor >= 5 &&
> + ctrl->version_step >= 1) {
why not use raw version value?
if (ctrl->raw > 0x10501 )
> + /* Only for versions >= 1.5.1 */
> + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR,
> + SWRM_RD_WR_CMD_RETRIES |
> + SWRM_CONTINUE_EXEC_ON_CMD_IGNORE);
> + } else {
> + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR,
> + SWRM_RD_WR_CMD_RETRIES);
> + }
>
> /* Set IRQ to PULSE */
> ctrl->reg_write(ctrl, SWRM_COMP_CFG_ADDR,
> --
> 2.21.0
--
~Vinod