Re: [PATCH V3 01/14] coresight: etm-perf: Allow an event to use different sinks
From: Suzuki K Poulose
Date: Tue Feb 02 2021 - 04:45:08 EST
On 2/1/21 11:17 PM, Mathieu Poirier wrote:
Hi Anshuman,
I have started reviewing this set. As it is quite voluminous comments will
come over serveral days. I will let you know when I am done.
On Wed, Jan 27, 2021 at 02:25:25PM +0530, Anshuman Khandual wrote:
From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
When there are multiple sinks on the system, in the absence
of a specified sink, it is quite possible that a default sink
for an ETM could be different from that of another ETM. However
we do not support having multiple sinks for an event yet. This
patch allows the event to use the default sinks on the ETMs
where they are scheduled as long as the sinks are of the same
type.
e.g, if we have 1x1 topology with per-CPU ETRs, the event can
use the per-CPU ETR for the session. However, if the sinks
are of different type, e.g TMC-ETR on one and a custom sink
on another, the event will only trace on the first detected
sink.
I found the above changelog very confusing - I read it several times and still
couldn't get all of it. In the end this patch prevents sinks of different types
from being used for session, and this is what the text should reflect.
Sorry about that. Your inference is correct, but it is only a side effect
of the primary motive. How about the following :
"When a sink is not specified by the user, the etm perf driver
finds a suitable sink automatically based on the first ETM, where
this event could be scheduled. Then we allocate the sink buffer based
on the selected sink. This is fine for a CPU bound event as the "sink"
is always guaranteed to be reachable from the ETM (as this is the only
ETM where the event is going to be scheduled). However, if we have a task
bound event, the event could be scheduled on any of the ETMs on the
system. In this case, currently we automatically select a sink and exclude
any ETMs that are not reachable from the selected sink. This is
problematic for 1x1 configurations as we end up in tracing the event
only on the "first" ETM, as the default sink is local to the first
ETM and unreachable from the rest.
However, we could allow the other ETMs to trace if they all have a
sink that is compatible with the "selected" sink and can use the
sink buffer. This can be easily done by verifying that they are
all driven by the same driver and matches the same subtype."
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Mike Leach <mike.leach@xxxxxxxxxx>
Tested-by: Linu Cherian <lcherian@xxxxxxxxxxx>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
---
drivers/hwtracing/coresight/coresight-etm-perf.c | 48 +++++++++++++++++++-----
1 file changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index bdc34ca..eb9e7e9 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -204,6 +204,13 @@ static void etm_free_aux(void *data)
schedule_work(&event_data->work);
}
+static bool sinks_match(struct coresight_device *a, struct coresight_device *b)
+{
+ if (!a || !b)
+ return false;
+ return (sink_ops(a) == sink_ops(b));
Yes
I think we can tighten this by verifying the dev->sub_type matches too.
+}
+
static void *etm_setup_aux(struct perf_event *event, void **pages,
int nr_pages, bool overwrite)
{
@@ -212,6 +219,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
cpumask_t *mask;
struct coresight_device *sink = NULL;
struct coresight_device *user_sink = NULL;
struct etm_event_data *event_data = NULL;
+ bool sink_forced = false;
event_data = alloc_event_data(cpu);
if (!event_data)
@@ -222,6 +230,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
if (event->attr.config2) {
id = (u32)event->attr.config2;
sink = coresight_get_sink_by_id(id);
user_sink = coresight_get_sink_by_id(id);
+ sink_forced = true;
}
mask = &event_data->mask;
@@ -235,7 +244,7 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
*/
for_each_cpu(cpu, mask) {
struct list_head *path;
- struct coresight_device *csdev;
struct coresight_device *last_sink = NULL;
+ struct coresight_device *csdev, *new_sink;
csdev = per_cpu(csdev_src, cpu);
/*
@@ -249,21 +258,35 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
}
/*
- * No sink provided - look for a default sink for one of the
- * devices. At present we only support topology where all CPUs
- * use the same sink [N:1], so only need to find one sink. The
- * coresight_build_path later will remove any CPU that does not
- * attach to the sink, or if we have not found a sink.
+ * No sink provided - look for a default sink for all the devices.
+ * We only support multiple sinks, only if all the default sinks
+ * are of the same type, so that the sink buffer can be shared
+ * as the event moves around. We don't trace on a CPU if it can't
s/can't/can't./
+ *
Extra line
OK
*/
- if (!sink)
- sink = coresight_find_default_sink(csdev);
+ if (!sink_forced) {
+ new_sink = coresight_find_default_sink(csdev);
+ if (!new_sink) {
+ cpumask_clear_cpu(cpu, mask);
+ continue;
+ }
+ /* Skip checks for the first sink */
+ if (!sink) {
+ sink = new_sink;
+ } else if (!sinks_match(new_sink, sink)) {
+ cpumask_clear_cpu(cpu, mask);
+ continue;
+ }
+ } else {
+ new_sink = sink;
+ }
if (!user_sink) {
/* find default sink for this CPU */
sink = coresight_find_default_sink(csdev);
if (!sink) {
cpumask_clear_cpu(cpu, mask);
continue;
}
/* Chech new sink with last sink */
if (last_sink && !sink_match(last_sink, sink)) {
cpumask_clear_cpu(cpu, mask);
continue;
}
last_sink = sink;
} else {
sink = user_sink;
}
Agreed, it is much better readable.
Suzuki