[RFC PATCH v2 3/3] arm64: dts: mt8195: add USB related nodes
From: Chunfeng Yun
Date: Wed Feb 03 2021 - 05:28:18 EST
Add USB nodes, PHY nodes and some fixed regulator nodes.
We prefer to use mt8192's compatible for the first USB controller
(port0), there is no wrong with the SOF/ITP interval; but for other
controllers (port1~port3) should use mt8195's one due to the wrong
default setting of SOF/ITP interval which should be calculated from
48M, but not 24M by default.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2: no changes
---
arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 70 +++++++++
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 163 ++++++++++++++++++++
2 files changed, 233 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
index 7264232bb7e9..a60682752e19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "mt8195.dtsi"
#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "MediaTek MT8195 evaluation board";
@@ -49,6 +50,36 @@
enable-active-high;
regulator-always-on;
};
+
+ usb_p0_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vbus0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ usb_p2_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ gpio = <&pio 131 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vbus2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ usb_p3_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ gpio = <&pio 5 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vbus3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
};
&pmic {
@@ -156,6 +187,22 @@
status = "okay";
};
+&u3phy0 {
+ status="okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status="okay";
+};
+
+&u3phy3 {
+ status="okay";
+};
+
&pio {
nor_pins_default: nordefault {
pins0 {
@@ -311,3 +358,26 @@
};
};
+
+&xhci0 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_p0_vbus>;
+ status = "okay";
+};
+
+&xhci1 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ status = "okay";
+};
+
+&xhci2 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_p2_vbus>;
+ status = "okay";
+};
+
+&xhci3 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&usb_p3_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ccb9d24b1c1e..60c75b23cf03 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/memory/mt8195-memory-port.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/power/mt8195-power.h>
#include <dt-bindings/reset/ti-syscon.h>
@@ -914,6 +915,83 @@
status = "disabled";
};
+ xhci0: usb@11200000 {
+ compatible = "mediatek,mt8192-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_SEL>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+ <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>,
+ <&topckgen CLK_TOP_SSUSB_REF>;
+ clock-names = "sys_ck", "xhci_ck", "ref_ck";
+ status = "disabled";
+ };
+
+ xhci1: usb@11290000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11290000 0 0x1000>,
+ <0 0x11293e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port1 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_1P_SEL>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_1P_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>,
+ <&topckgen CLK_TOP_SSUSB_P1_REF>;
+ clock-names = "sys_ck", "xhci_ck", "ref_ck";
+ status = "disabled";
+ };
+
+ xhci2: usb@112a0000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x112a0000 0 0x1000>,
+ <0 0x112a3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_2P_SEL>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_2P_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>,
+ <&topckgen CLK_TOP_SSUSB_P2_REF>;
+ clock-names = "sys_ck", "xhci_ck", "ref_ck";
+ status = "disabled";
+ };
+
+ xhci3: usb@112b0000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x112b0000 0 0x1000>,
+ <0 0x112b3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port3 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_3P_SEL>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_3P_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>,
+ <&topckgen CLK_TOP_SSUSB_P3_REF>;
+ clock-names = "sys_ck", "xhci_ck", "ref_ck";
+ status = "disabled";
+ };
+
pcie0: pcie@112f0000 {
device_type = "pci";
compatible = "mediatek,mt8195-pcie";
@@ -998,6 +1076,40 @@
status = "disabled";
};
+ u3phy2: usb-phy2@11c40000 {
+ compatible = "mediatek,mt8195-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c40000 0x700>;
+ status = "disabled";
+
+ u2port2: usb2-phy2@0 {
+ reg = <0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ };
+
+ u3phy3: usb-phy3@11c50000 {
+ compatible = "mediatek,mt8195-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c50000 0x700>;
+ status = "disabled";
+
+ u2port3: usb2-phy3@0 {
+ reg = <0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
i2c5: i2c5@11d00000 {
compatible = "mediatek,mt8195-i2c",
"mediatek,mt8192-i2c";
@@ -1138,6 +1250,57 @@
#clock-cells = <1>;
};
+ u3phy1: usb-phy1@11e30000 {
+ compatible = "mediatek,mt8195-tphy",
+ "mediatek,generic-tphy-v2";
+ power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e30000 0x1000>;
+ status = "disabled";
+
+ u2port1: usb2-phy1@0 {
+ reg = <0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port1: usb3-phy1@700 {
+ reg = <0x700 0x900>;
+ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ u3phy0: usb-phy0@11e40000 {
+ compatible = "mediatek,mt8195-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e40000 0x1000>;
+ status = "disabled";
+
+ u2port0: usb2-phy0@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb3-phy0@700 {
+ reg = <0x700 0 0x900>;
+ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
pciephy: phy@11e80000 {
compatible = "mediatek,mt8195-pcie-phy";
#address-cells = <2>;
--
2.18.0