Re: [PATCH v3 4/5] ACPI: video: Clean up printing messages

From: Hans de Goede
Date: Thu Feb 04 2021 - 13:35:53 EST

Next message: Thomas Zimmermann: "Re: [PATCH v6 02/10] Revert "drm/qxl: do not run release if qxl failed to init""
Previous message: Linus Torvalds: "Re: Linux 5.11-rc5"
In reply to: Hanjun Guo: "Re: [PATCH v3 4/5] ACPI: video: Clean up printing messages"
Next in thread: Rafael J. Wysocki: "[PATCH v3 1/5] ACPI: AC: Clean up printing messages"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 2/3/21 7:48 PM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>
> Replace the ACPI_DEBUG_PRINT() instances in acpi_video.c with
> acpi_handle_debug() calls and the ACPI_EXCEPTION()/ACPI_ERROR()/
> ACPI_WARNING() instances in there with acpi_handle_info() calls,
> which among other things causes the excessive log levels of those
> messages to be increased.
>
> Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
> used any more from acpi_video.c, drop the no longer needed
> ACPI_VIDEO_COMPONENT definition from the headers and update the
> documentation accordingly.
>
> While at it, add a pr_fmt() definition to acpi_video.c, replace the
> direct printk() invocations in there with acpi_handle_info() or
> pr_info() (and reduce the excessive log level where applicable) and
> drop the PREFIX sybmbol definition which is not necessary any more
> from acpi_video.c.
>
> Also make unrelated janitorial changes to fix up white space and
> use ACPI_FAILURE() instead of negating ACPI_SUCCESS().
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans

> ---
>
> v2 -> v3: Replace more !ACPI_SUCCESS() instances with ACPI_FAILURE().
>
> v1 -> v2: Changelog update.
>
> ---
> Documentation/firmware-guide/acpi/debug.rst | 1
> drivers/acpi/acpi_video.c | 99 ++++++++++++++--------------
> drivers/acpi/sysfs.c | 1
> include/acpi/acpi_drivers.h | 1
> 4 files changed, 51 insertions(+), 51 deletions(-)
>
> Index: linux-pm/drivers/acpi/acpi_video.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/acpi_video.c
> +++ linux-pm/drivers/acpi/acpi_video.c
> @@ -7,6 +7,8 @@
> * Copyright (C) 2006 Thomas Tuttle <linux-kernel@xxxxxxxxxxx>
> */
>
> +#define pr_fmt(fmt) "ACPI: video: " fmt
> +
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/init.h>
> @@ -26,16 +28,11 @@
> #include <acpi/video.h>
> #include <linux/uaccess.h>
>
> -#define PREFIX "ACPI: "
> -
> #define ACPI_VIDEO_BUS_NAME "Video Bus"
> #define ACPI_VIDEO_DEVICE_NAME "Video Device"
>
> #define MAX_NAME_LEN 20
>
> -#define _COMPONENT ACPI_VIDEO_COMPONENT
> -ACPI_MODULE_NAME("video");
> -
> MODULE_AUTHOR("Bruno Ducrot");
> MODULE_DESCRIPTION("ACPI Video Driver");
> MODULE_LICENSE("GPL");
> @@ -326,11 +323,11 @@ acpi_video_device_lcd_query_levels(acpi_
> *levels = NULL;
>
> status = acpi_evaluate_object(handle, "_BCL", NULL, &buffer);
> - if (!ACPI_SUCCESS(status))
> + if (ACPI_FAILURE(status))
> return status;
> obj = (union acpi_object *)buffer.pointer;
> if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
> - printk(KERN_ERR PREFIX "Invalid _BCL data\n");
> + acpi_handle_info(handle, "Invalid _BCL data\n");
> status = -EFAULT;
> goto err;
> }
> @@ -354,7 +351,7 @@ acpi_video_device_lcd_set_level(struct a
> status = acpi_execute_simple_method(device->dev->handle,
> "_BCM", level);
> if (ACPI_FAILURE(status)) {
> - ACPI_ERROR((AE_INFO, "Evaluating _BCM failed"));
> + acpi_handle_info(device->dev->handle, "_BCM evaluation failed\n");
> return -EIO;
> }
>
> @@ -368,7 +365,7 @@ acpi_video_device_lcd_set_level(struct a
> return 0;
> }
>
> - ACPI_ERROR((AE_INFO, "Current brightness invalid"));
> + acpi_handle_info(device->dev->handle, "Current brightness invalid\n");
> return -EINVAL;
> }
>
> @@ -622,9 +619,8 @@ acpi_video_device_lcd_get_level_current(
> * BQC returned an invalid level.
> * Stop using it.
> */
> - ACPI_WARNING((AE_INFO,
> - "%s returned an invalid level",
> - buf));
> + acpi_handle_info(device->dev->handle,
> + "%s returned an invalid level", buf);
> device->cap._BQC = device->cap._BCQ = 0;
> } else {
> /*
> @@ -635,7 +631,8 @@ acpi_video_device_lcd_get_level_current(
> * ACPI video backlight still works w/ buggy _BQC.
> * http://bugzilla.kernel.org/show_bug.cgi?id=12233
> */
> - ACPI_WARNING((AE_INFO, "Evaluating %s failed", buf));
> + acpi_handle_info(device->dev->handle,
> + "%s evaluation failed", buf);
> device->cap._BQC = device->cap._BCQ = 0;
> }
> }
> @@ -675,7 +672,7 @@ acpi_video_device_EDID(struct acpi_video
> if (obj && obj->type == ACPI_TYPE_BUFFER)
> *edid = obj;
> else {
> - printk(KERN_ERR PREFIX "Invalid _DDC data\n");
> + acpi_handle_info(device->dev->handle, "Invalid _DDC data\n");
> status = -EFAULT;
> kfree(obj);
> }
> @@ -827,10 +824,9 @@ int acpi_video_get_levels(struct acpi_de
> int result = 0;
> u32 value;
>
> - if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device->handle,
> - &obj))) {
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available "
> - "LCD brightness level\n"));
> + if (ACPI_FAILURE(acpi_video_device_lcd_query_levels(device->handle, &obj))) {
> + acpi_handle_debug(device->handle,
> + "Could not query available LCD brightness level\n");
> result = -ENODEV;
> goto out;
> }
> @@ -842,7 +838,6 @@ int acpi_video_get_levels(struct acpi_de
>
> br = kzalloc(sizeof(*br), GFP_KERNEL);
> if (!br) {
> - printk(KERN_ERR "can't allocate memory\n");
> result = -ENOMEM;
> goto out;
> }
> @@ -863,7 +858,7 @@ int acpi_video_get_levels(struct acpi_de
> for (i = 0; i < obj->package.count; i++) {
> o = (union acpi_object *)&obj->package.elements[i];
> if (o->type != ACPI_TYPE_INTEGER) {
> - printk(KERN_ERR PREFIX "Invalid data\n");
> + acpi_handle_info(device->handle, "Invalid data\n");
> continue;
> }
> value = (u32) o->integer.value;
> @@ -900,7 +895,8 @@ int acpi_video_get_levels(struct acpi_de
> br->levels[i] = br->levels[i - level_ac_battery];
> count += level_ac_battery;
> } else if (level_ac_battery > ACPI_VIDEO_FIRST_LEVEL)
> - ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package"));
> + acpi_handle_info(device->handle,
> + "Too many duplicates in _BCL package");
>
> /* Check if the _BCL package is in a reversed order */
> if (max_level == br->levels[ACPI_VIDEO_FIRST_LEVEL]) {
> @@ -910,8 +906,8 @@ int acpi_video_get_levels(struct acpi_de
> sizeof(br->levels[ACPI_VIDEO_FIRST_LEVEL]),
> acpi_video_cmp_level, NULL);
> } else if (max_level != br->levels[count - 1])
> - ACPI_ERROR((AE_INFO,
> - "Found unordered _BCL package"));
> + acpi_handle_info(device->handle,
> + "Found unordered _BCL package");
>
> br->count = count;
> *dev_br = br;
> @@ -989,9 +985,9 @@ set_level:
> if (result)
> goto out_free_levels;
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> - "found %d brightness levels\n",
> - br->count - ACPI_VIDEO_FIRST_LEVEL));
> + acpi_handle_debug(device->dev->handle, "found %d brightness levels\n",
> + br->count - ACPI_VIDEO_FIRST_LEVEL);
> +
> return 0;
>
> out_free_levels:
> @@ -1023,7 +1019,8 @@ static void acpi_video_device_find_cap(s
> if (acpi_has_method(device->dev->handle, "_BQC")) {
> device->cap._BQC = 1;
> } else if (acpi_has_method(device->dev->handle, "_BCQ")) {
> - printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n");
> + acpi_handle_info(device->dev->handle,
> + "_BCQ is used instead of _BQC\n");
> device->cap._BCQ = 1;
> }
>
> @@ -1083,8 +1080,7 @@ static int acpi_video_bus_check(struct a
> /* Does this device support video switching? */
> if (video->cap._DOS || video->cap._DOD) {
> if (!video->cap._DOS) {
> - printk(KERN_WARNING FW_BUG
> - "ACPI(%s) defines _DOD but not _DOS\n",
> + pr_info(FW_BUG "ACPI(%s) defines _DOD but not _DOS\n",
> acpi_device_bid(video->device));
> }
> video->flags.multihead = 1;
> @@ -1272,7 +1268,8 @@ acpi_video_device_bind(struct acpi_video
> ids = &video->attached_array[i];
> if (device->device_id == (ids->value.int_val & 0xffff)) {
> ids->bind_info = device;
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "device_bind %d\n", i));
> + acpi_handle_debug(video->device->handle, "%s: %d\n",
> + __func__, i);
> }
> }
> }
> @@ -1324,20 +1321,22 @@ static int acpi_video_device_enumerate(s
> return AE_NOT_EXIST;
>
> status = acpi_evaluate_object(video->device->handle, "_DOD", NULL, &buffer);
> - if (!ACPI_SUCCESS(status)) {
> - ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD"));
> + if (ACPI_FAILURE(status)) {
> + acpi_handle_info(video->device->handle,
> + "_DOD evaluation failed: %s\n",
> + acpi_format_exception(status));
> return status;
> }
>
> dod = buffer.pointer;
> if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) {
> - ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data"));
> + acpi_handle_info(video->device->handle, "Invalid _DOD data\n");
> status = -EFAULT;
> goto out;
> }
>
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d video heads in _DOD\n",
> - dod->package.count));
> + acpi_handle_debug(video->device->handle, "Found %d video heads in _DOD\n",
> + dod->package.count);
>
> active_list = kcalloc(1 + dod->package.count,
> sizeof(struct acpi_video_enumerated_device),
> @@ -1352,15 +1351,18 @@ static int acpi_video_device_enumerate(s
> obj = &dod->package.elements[i];
>
> if (obj->type != ACPI_TYPE_INTEGER) {
> - printk(KERN_ERR PREFIX
> - "Invalid _DOD data in element %d\n", i);
> + acpi_handle_info(video->device->handle,
> + "Invalid _DOD data in element %d\n", i);
> continue;
> }
>
> active_list[count].value.int_val = obj->integer.value;
> active_list[count].bind_info = NULL;
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "dod element[%d] = %d\n", i,
> - (int)obj->integer.value));
> +
> + acpi_handle_debug(video->device->handle,
> + "_DOD element[%d] = %d\n", i,
> + (int)obj->integer.value);
> +
> count++;
> }
>
> @@ -1451,7 +1453,8 @@ acpi_video_switch_brightness(struct work
>
> out:
> if (result)
> - printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
> + acpi_handle_info(device->dev->handle,
> + "Failed to switch brightness\n");
> }
>
> int acpi_video_get_edid(struct acpi_device *device, int type, int device_id,
> @@ -1601,8 +1604,8 @@ static void acpi_video_bus_notify(struct
> break;
>
> default:
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> - "Unsupported event [0x%x]\n", event));
> + acpi_handle_debug(device->handle, "Unsupported event [0x%x]\n",
> + event);
> break;
> }
>
> @@ -1675,8 +1678,7 @@ static void acpi_video_device_notify(acp
> keycode = KEY_DISPLAY_OFF;
> break;
> default:
> - ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> - "Unsupported event [0x%x]\n", event));
> + acpi_handle_debug(handle, "Unsupported event [0x%x]\n", event);
> break;
> }
>
> @@ -1812,11 +1814,12 @@ static void acpi_video_dev_register_back
> &device->cooling_dev->device.kobj,
> "thermal_cooling");
> if (result)
> - printk(KERN_ERR PREFIX "Create sysfs link\n");
> + pr_info("sysfs link creation failed\n");
> +
> result = sysfs_create_link(&device->cooling_dev->device.kobj,
> &device->dev->dev.kobj, "device");
> if (result)
> - printk(KERN_ERR PREFIX "Create sysfs link\n");
> + pr_info("Reverse sysfs link creation failed\n");
> }
>
> static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
> @@ -2030,7 +2033,7 @@ static int acpi_video_bus_add(struct acp
> acpi_video_bus_match, NULL,
> device, NULL);
> if (status == AE_ALREADY_EXISTS) {
> - printk(KERN_WARNING FW_BUG
> + pr_info(FW_BUG
> "Duplicate ACPI video bus devices for the"
> " same VGA controller, please try module "
> "parameter \"video.allow_duplicates=1\""
> @@ -2073,7 +2076,7 @@ static int acpi_video_bus_add(struct acp
> if (error)
> goto err_put_video;
>
> - printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n",
> + pr_info("%s [%s] (multi-head: %s rom: %s post: %s)\n",
> ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device),
> video->flags.multihead ? "yes" : "no",
> video->flags.rom ? "yes" : "no",
> Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
> ===================================================================
> --- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
> +++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
> @@ -59,7 +59,6 @@ shows the supported mask values, current
> ACPI_SYSTEM_COMPONENT 0x02000000
> ACPI_THERMAL_COMPONENT 0x04000000
> ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
> - ACPI_VIDEO_COMPONENT 0x10000000
> ACPI_PROCESSOR_COMPONENT 0x20000000
>
> debug_level
> Index: linux-pm/drivers/acpi/sysfs.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/sysfs.c
> +++ linux-pm/drivers/acpi/sysfs.c
> @@ -59,7 +59,6 @@ static const struct acpi_dlayer acpi_deb
> ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
> ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT),
> ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
> - ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT),
> ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
> };
>
> Index: linux-pm/include/acpi/acpi_drivers.h
> ===================================================================
> --- linux-pm.orig/include/acpi/acpi_drivers.h
> +++ linux-pm/include/acpi/acpi_drivers.h
> @@ -22,7 +22,6 @@
> #define ACPI_SYSTEM_COMPONENT 0x02000000
> #define ACPI_THERMAL_COMPONENT 0x04000000
> #define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
> -#define ACPI_VIDEO_COMPONENT 0x10000000
> #define ACPI_PROCESSOR_COMPONENT 0x20000000
>
> /*
>
>
>

Next message: Thomas Zimmermann: "Re: [PATCH v6 02/10] Revert "drm/qxl: do not run release if qxl failed to init""
Previous message: Linus Torvalds: "Re: Linux 5.11-rc5"
In reply to: Hanjun Guo: "Re: [PATCH v3 4/5] ACPI: video: Clean up printing messages"
Next in thread: Rafael J. Wysocki: "[PATCH v3 1/5] ACPI: AC: Clean up printing messages"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]