[PATCH] drivers: scsi: lpfc: Mundane spelling and sentence construction fixes throughout the file

[Bhaskar Chowdhury]

Few spellings and sentence  construction done throughout the file.


Signed-off-by: Bhaskar Chowdhury <unixbhaskar@xxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_init.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ac67f420ec26..923fadb7945a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11022,7 +11022,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 			/* We found a matching phys_id, so copy the IRQ info */
 			cpup->eq = new_cpup->eq;

-			/* Bump start_cpu to the next slot to minmize the
+			/* Bump start_cpu to the next slot to minimize the
 			 * chance of having multiple unassigned CPU entries
 			 * selecting the same IRQ.
 			 */
@@ -11076,7 +11076,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 			/* We found an available entry, copy the IRQ info */
 			cpup->eq = new_cpup->eq;

-			/* Bump start_cpu to the next slot to minmize the
+			/* Bump start_cpu to the next slot to minimize the
 			 * chance of having multiple unassigned CPU entries
 			 * selecting the same IRQ.
 			 */
@@ -11246,14 +11246,14 @@ lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
 		if (!maskp)
 			continue;
 		/*
-		 * if irq is not affinitized to the cpu going
+		 * if irq is not affinities to the cpu going
 		 * then we don't need to poll the eq attached
 		 * to it.
 		 */
 		if (!cpumask_and(tmp, maskp, cpumask_of(cpu)))
 			continue;
-		/* get the cpus that are online and are affini-
-		 * tized to this irq vector.  If the count is
+		/* get the cpus that are online and are affinities
+		 * to this irq vector.  If the count is
 		 * more than 1 then cpuhp is not going to shut-
 		 * down this vector.  Since this cpu has not
 		 * gone offline yet, we need >1.
@@ -11367,7 +11367,7 @@ lpfc_irq_clear_aff(struct lpfc_hba_eq_hdl *eqhdl)
  * online cpu on the phba's original_mask and migrate all offlining IRQ
  * affinities.
  *
- * If cpu is coming online, reaffinitize the IRQ back to the onlining cpu.
+ * If cpu is coming online, again affinities the IRQ back to the on lining cpu.
  *
  * Note: Call only if NUMA or NHT mode is enabled, otherwise rely on
  *	 PCI_IRQ_AFFINITY to auto-manage IRQ affinity.
@@ -11401,7 +11401,7 @@ lpfc_irq_rebalance(struct lpfc_hba *phba, unsigned int cpu, bool offline)

 		/* Found a valid CPU */
 		if ((cpu_select < nr_cpu_ids) && (cpu_select != cpu)) {
-			/* Go through each eqhdl and ensure offlining
+			/* Go through each eqhdl and ensure off lining
 			 * cpu aff_mask is migrated
 			 */
 			for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
@@ -11597,7 +11597,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
 				 * this vector, set LPFC_CPU_FIRST_IRQ.
 				 *
 				 * With certain platforms its possible that irq
-				 * vectors are affinitized to all the cpu's.
+				 * vectors are affinities to all the cpu's.
 				 * This can result in each cpu_map.eq to be set
 				 * to the last vector, resulting in overwrite
 				 * of all the previous cpu_map.eq.  Ensure that
@@ -11635,7 +11635,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
 		free_irq(eqhdl->irq, eqhdl);
 	}

-	/* Unconfigure MSI-X capability structure */
+	/* Not configure MSI-X capability structure */
 	pci_free_irq_vectors(phba->pcidev);

 vec_fail_out:
@@ -11744,7 +11744,7 @@ lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
 		}
 	}

-	/* Fallback to INTx if both MSI-X/MSI initalization failed */
+	/* Fallback to INTx if both MSI-X/MSI initialization failed */
 	if (phba->intr_type == NONE) {
 		retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
 				     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
@@ -12479,7 +12479,7 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
  * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
  * @pdev: pointer to PCI device
  *
- * This routine is to be called to disattach a device with SLI-3 interface
+ * This routine is to be called to not attach a device with SLI-3 interface
  * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
  * removed from PCI bus, it performs all the necessary cleanup for the HBA
  * device to be removed from the PCI subsystem properly.
@@ -12940,7 +12940,7 @@ lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
 	/* Three cases:  (1) FW was not supported on the detected adapter.
 	 * (2) FW update has been locked out administratively.
 	 * (3) Some other error during FW update.
-	 * In each case, an unmaskable message is written to the console
+	 * In each case, an unusable message is written to the console
 	 * for admin diagnosis.
 	 */
 	if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
--
2.30.0