Re: [PATCH v4 2/7] gpio: gpio-ep93xx: Fix single irqchip with multi gpiochips
From: Alexander Sverdlin
Date: Fri Feb 05 2021 - 03:39:09 EST
Hi!
On Fri, 2021-02-05 at 11:05 +0300, Nikita Shubin wrote:
> Fixes the following warnings which results in interrupts disabled on
> port B/F:
>
> gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
> gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.
>
> - added separate irqchip for each interrupt capable gpiochip
> - provided unique names for each irqchip
>
> Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
> Signed-off-by: Nikita Shubin <nikita.shubin@xxxxxxxxxxx>
> ---
> drivers/gpio/gpio-ep93xx.c | 38 ++++++++++++++++++++++++++++----------
> 1 file changed, 28 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
> index e3b5e2c37259..3c9f7233e62d 100644
> --- a/drivers/gpio/gpio-ep93xx.c
> +++ b/drivers/gpio/gpio-ep93xx.c
> @@ -38,6 +38,7 @@
> #define EP93XX_GPIO_F_IRQ_BASE 80
>
> struct ep93xx_gpio_irq_chip {
> + struct irq_chip ic;
> u8 irq_offset;
> u8 int_unmasked;
> u8 int_enabled;
> @@ -284,9 +285,11 @@ struct ep93xx_gpio_bank {
> bool has_irq;
> bool has_hierarchical_irq;
> unsigned int irq_base;
> + const char *irq_name;
> };
>
> -#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \
> +#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base, \
> +_irq_name) \
> { \
> .label = _label, \
> .data = _data, \
> @@ -296,20 +299,21 @@ struct ep93xx_gpio_bank {
> .has_irq = _has_irq, \
> .has_hierarchical_irq = _has_hier, \
> .irq_base = _irq_base, \
> + .irq_name = _irq_name, \
> }
>
> static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
> /* Bank A has 8 IRQs */
> - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64),
> + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64, "gpio-irq-a"),
> /* Bank B has 8 IRQs */
> - EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72),
> - EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0),
> - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0),
> - EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0),
> + EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72, "gpio-irq-b"),
> + EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0, 0),
> + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0, 0),
> + EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0, 0),
> /* Bank F has 8 IRQs */
> - EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0),
> - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0),
> - EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
> + EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0, "gpio-irq-b"),
This copy-paste error makes it obvious, that this information is
superfluous...
> + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0, 0),
> + EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0, 0),
> };
>
> static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
> @@ -331,6 +335,16 @@ static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc, unsigned offset)
> return EP93XX_GPIO_F_IRQ_BASE + offset;
> }
>
> +static void ep93xx_init_irq_chip(struct irq_chip *ic, const char *irq_name)
> +{
> + ic->name = irq_name;
Assuming you pass "label" here, you could do something like
ic->name = kasprintf(GFP_KERNEL, "gpio-irq-%s", irq_name);
> + ic->irq_ack = ep93xx_gpio_irq_ack;
> + ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack;
> + ic->irq_mask = ep93xx_gpio_irq_mask;
> + ic->irq_unmask = ep93xx_gpio_irq_unmask;
> + ic->irq_set_type = ep93xx_gpio_irq_type;
> +}
--
Alexander Sverdlin.