[PATCH v5 0/2] add support for GPIO or IRQ based evemt counter

[Oleksij Rempel]

changes v5:
- rename it to event counter, since it support different event sources
- make it work with gpio-only or irq-only configuration
- update yaml binding

changes v4:
- use IRQ_NOAUTOEN to not enable IRQ by default
- rename gpio_ from name pattern and make this driver work any IRQ
  source.

changes v3:
- convert counter to atomic_t

changes v2:
- add commas
- avoid possible unhandled interrupts in the enable path
- do not use of_ specific gpio functions

Add support for GPIO based pulse counter. For now it can only count
pulses. With counter char device support, we will be able to attach
timestamps and measure actual pulse frequency.

Never the less, it is better to mainline this driver now (before chardev
patches go mainline), to provide developers additional use case for the counter
framework with chardev support.

Oleksij Rempel (2):
  dt-bindings: counter: add event-counter binding
  counter: add IRQ or GPIO based event counter

 .../bindings/counter/event-counter.yaml       |  56 ++++
 drivers/counter/Kconfig                       |  10 +
 drivers/counter/Makefile                      |   1 +
 drivers/counter/event-cnt.c                   | 250 ++++++++++++++++++
 4 files changed, 317 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/counter/event-counter.yaml
 create mode 100644 drivers/counter/event-cnt.c

-- 
2.30.0