[PATCH v5 14/22] powerpc/syscall: implement system call entry/exit logic in C for PPC32

From: Christophe Leroy
Date: Mon Feb 08 2021 - 11:30:09 EST

Next message: Greg Kroah-Hartman: "[PATCH 5.4 09/65] bpf, cgroup: Fix problematic bounds check"
Previous message: Christophe Leroy: "[PATCH v5 11/22] powerpc/syscall: Save r3 in regs->orig_r3"
In reply to: Nicholas Piggin: "Re: [PATCH v5 11/22] powerpc/syscall: Save r3 in regs->orig_r3"
Next in thread: Christophe Leroy: "[PATCH v5 21/22] powerpc/32: Remove the counter in global_dbcr0"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

That's port of PPC64 syscall entry/exit logic in C to PPC32.

Performancewise on 8xx:
Before : 304 cycles on null_syscall
After : 348 cycles on null_syscall

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
---
arch/powerpc/kernel/entry_32.S | 224 +++++--------------------------
arch/powerpc/kernel/head_32.h | 18 ---
arch/powerpc/kernel/head_booke.h | 17 ---
3 files changed, 30 insertions(+), 229 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 97dc28a68465..bbf7ecea6fe0 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -329,117 +329,23 @@ stack_ovf:
_ASM_NOKPROBE_SYMBOL(stack_ovf)
#endif

-#ifdef CONFIG_TRACE_IRQFLAGS
-trace_syscall_entry_irq_off:
- /*
- * Syscall shouldn't happen while interrupts are disabled,
- * so let's do a warning here.
- */
-0: trap
- EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
- bl trace_hardirqs_on
-
- /* Now enable for real */
- LOAD_REG_IMMEDIATE(r10, MSR_KERNEL | MSR_EE)
- mtmsr r10
-
- REST_GPR(0, r1)
- REST_4GPRS(3, r1)
- REST_2GPRS(7, r1)
- b DoSyscall
-#endif /* CONFIG_TRACE_IRQFLAGS */
-
.globl transfer_to_syscall
transfer_to_syscall:
SAVE_NVGPRS(r1)
#ifdef CONFIG_PPC_BOOK3S_32
kuep_lock r11, r12
#endif
-#ifdef CONFIG_TRACE_IRQFLAGS
- andi. r12,r9,MSR_EE
- beq- trace_syscall_entry_irq_off
-#endif /* CONFIG_TRACE_IRQFLAGS */

-/*
- * Handle a system call.
- */
- .stabs "arch/powerpc/kernel/",N_SO,0,0,0f
- .stabs "entry_32.S",N_SO,0,0,0f
-0:
-
-_GLOBAL(DoSyscall)
- stw r3,ORIG_GPR3(r1)
- li r12,0
- stw r12,RESULT(r1)
-#ifdef CONFIG_TRACE_IRQFLAGS
- /* Make sure interrupts are enabled */
- mfmsr r11
- andi. r12,r11,MSR_EE
- /* We came in with interrupts disabled, we WARN and mark them enabled
- * for lockdep now */
-0: tweqi r12, 0
- EMIT_BUG_ENTRY 0b,__FILE__,__LINE__, BUGFLAG_WARNING
-#endif /* CONFIG_TRACE_IRQFLAGS */
- lwz r11,TI_FLAGS(r2)
- andi. r11,r11,_TIF_SYSCALL_DOTRACE
- bne- syscall_dotrace
-syscall_dotrace_cont:
- cmplwi 0,r0,NR_syscalls
- lis r10,sys_call_table@h
- ori r10,r10,sys_call_table@l
- slwi r0,r0,2
- bge- 66f
-
- barrier_nospec_asm
- /*
- * Prevent the load of the handler below (based on the user-passed
- * system call number) being speculatively executed until the test
- * against NR_syscalls and branch to .66f above has
- * committed.
- */
+ /* Calling convention has r9 = orig r0, r10 = regs */
+ addi r10,r1,STACK_FRAME_OVERHEAD
+ mr r9,r0
+ stw r10,THREAD+PT_REGS(r2)
+ bl system_call_exception

- lwzx r10,r10,r0 /* Fetch system call handler [ptr] */
- mtlr r10
- addi r9,r1,STACK_FRAME_OVERHEAD
- PPC440EP_ERR42
- blrl /* Call handler */
- .globl ret_from_syscall
ret_from_syscall:
-#ifdef CONFIG_DEBUG_RSEQ
- /* Check whether the syscall is issued inside a restartable sequence */
- stw r3,GPR3(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl rseq_syscall
- lwz r3,GPR3(r1)
-#endif
- mr r6,r3
- /* disable interrupts so current_thread_info()->flags can't change */
- LOAD_REG_IMMEDIATE(r10,MSR_KERNEL) /* doesn't include MSR_EE */
- /* Note: We don't bother telling lockdep about it */
- mtmsr r10
- lwz r9,TI_FLAGS(r2)
- li r8,-MAX_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
- bne- syscall_exit_work
- cmplw 0,r3,r8
- blt+ syscall_exit_cont
- lwz r11,_CCR(r1) /* Load CR */
- neg r3,r3
- oris r11,r11,0x1000 /* Set SO bit in CR */
- stw r11,_CCR(r1)
-syscall_exit_cont:
- lwz r8,_MSR(r1)
-#ifdef CONFIG_TRACE_IRQFLAGS
- /* If we are going to return from the syscall with interrupts
- * off, we trace that here. It shouldn't normally happen.
- */
- andi. r10,r8,MSR_EE
- bne+ 1f
- stw r3,GPR3(r1)
- bl trace_hardirqs_off
- lwz r3,GPR3(r1)
-1:
-#endif /* CONFIG_TRACE_IRQFLAGS */
+ addi r4,r1,STACK_FRAME_OVERHEAD
+ li r5,0
+ bl syscall_exit_prepare
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -453,12 +359,6 @@ syscall_exit_cont:
cmplwi cr0,r5,0
bne- 2f
#endif /* CONFIG_PPC_47x */
-1:
-BEGIN_FTR_SECTION
- lwarx r7,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
- stwcx. r0,0,r1 /* to clear the reservation */
- ACCOUNT_CPU_USER_EXIT(r2, r5, r7)
#ifdef CONFIG_PPC_BOOK3S_32
kuep_unlock r5, r7
#endif
@@ -466,21 +366,36 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
mtlr r4
- mtcr r5
lwz r7,_NIP(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
+ lwz r8,_MSR(r1)
+ cmpwi r3,0
+ lwz r3,GPR3(r1)
syscall_exit_finish:
-#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PERF_EVENTS)
- mtspr SPRN_NRI, r0
-#endif
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
+
+ bne 3f
+ mtcr r5
+
+1: lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
rfi
#ifdef CONFIG_40x
b . /* Prevent prefetch past rfi */
#endif
-_ASM_NOKPROBE_SYMBOL(syscall_exit_finish)
+
+3: mtcr r5
+ lwz r4,_CTR(r1)
+ lwz r5,_XER(r1)
+ REST_NVGPRS(r1)
+ mtctr r4
+ mtxer r5
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ REST_8GPRS(4,r1)
+ lwz r12,GPR12(r1)
+ b 1b
+
#ifdef CONFIG_44x
2: li r7,0
iccci r0,r0
@@ -488,9 +403,6 @@ _ASM_NOKPROBE_SYMBOL(syscall_exit_finish)
b 1b
#endif /* CONFIG_44x */

-66: li r3,-ENOSYS
- b ret_from_syscall
-
.globl ret_from_fork
ret_from_fork:
REST_NVGPRS(r1)
@@ -509,82 +421,6 @@ ret_from_kernel_thread:
li r3,0
b ret_from_syscall

-/* Traced system call support */
-syscall_dotrace:
- SAVE_NVGPRS(r1)
- li r0,0xc00
- stw r0,_TRAP(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_syscall_trace_enter
- /*
- * Restore argument registers possibly just changed.
- * We use the return value of do_syscall_trace_enter
- * for call number to look up in the table (r0).
- */
- mr r0,r3
- lwz r3,GPR3(r1)
- lwz r4,GPR4(r1)
- lwz r5,GPR5(r1)
- lwz r6,GPR6(r1)
- lwz r7,GPR7(r1)
- lwz r8,GPR8(r1)
- REST_NVGPRS(r1)
-
- cmplwi r0,NR_syscalls
- /* Return code is already in r3 thanks to do_syscall_trace_enter() */
- bge- ret_from_syscall
- b syscall_dotrace_cont
-
-syscall_exit_work:
- andi. r0,r9,_TIF_RESTOREALL
- beq+ 0f
- REST_NVGPRS(r1)
- b 2f
-0: cmplw 0,r3,r8
- blt+ 1f
- andi. r0,r9,_TIF_NOERROR
- bne- 1f
- lwz r11,_CCR(r1) /* Load CR */
- neg r3,r3
- oris r11,r11,0x1000 /* Set SO bit in CR */
- stw r11,_CCR(r1)
-
-1: stw r6,RESULT(r1) /* Save result */
- stw r3,GPR3(r1) /* Update return value */
-2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
- beq 4f
-
- /* Clear per-syscall TIF flags if any are set. */
-
- li r11,_TIF_PERSYSCALL_MASK
- addi r12,r2,TI_FLAGS
-3: lwarx r8,0,r12
- andc r8,r8,r11
- stwcx. r8,0,r12
- bne- 3b
-
-4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
- beq ret_from_except
-
- /* Re-enable interrupts. There is no need to trace that with
- * lockdep as we are supposed to have IRQs on at this point
- */
- ori r10,r10,MSR_EE
- mtmsr r10
-
- /* Save NVGPRS if they're not saved already */
- lwz r4,_TRAP(r1)
- andi. r4,r4,1
- beq 5f
- SAVE_NVGPRS(r1)
- li r4,0xc00
- stw r4,_TRAP(r1)
-5:
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_syscall_trace_leave
- b ret_from_except_full
-
/*
* System call was called from kernel. We get here with SRR1 in r9.
* Mark the exception as recoverable once we have retrieved SRR0,
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 7b12736ec546..fea7fe00a690 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -154,17 +154,12 @@
SAVE_GPR(0, r11)
SAVE_4GPRS(3, r11)
SAVE_2GPRS(7, r11)
- addi r11,r1,STACK_FRAME_OVERHEAD
addi r2,r12,-THREAD
- stw r11,PT_REGS(r12)
#if defined(CONFIG_40x)
/* Check to see if the dbcr0 register is set up to debug. Use the
internal debug mode bit to do this. */
lwz r12,THREAD_DBCR0(r12)
andis. r12,r12,DBCR0_IDM@h
-#endif
- ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
-#if defined(CONFIG_40x)
beq+ 3f
/* From user and task is ptraced - load up global dbcr0 */
li r12,-1 /* clear all pending debug events */
@@ -176,21 +171,8 @@
lwz r12,4(r11)
addi r12,r12,-1
stw r12,4(r11)
-#endif
-
3:
-#ifdef CONFIG_TRACE_IRQFLAGS
- /*
- * If MSR is changing we need to keep interrupts disabled at this point
- * otherwise we might risk taking an interrupt before we tell lockdep
- * they are enabled.
- */
- LOAD_REG_IMMEDIATE(r10, MSR_KERNEL)
- rlwimi r10, r9, 0, MSR_EE
-#else
- LOAD_REG_IMMEDIATE(r10, MSR_KERNEL | MSR_EE)
#endif
- mtmsr r10
b transfer_to_syscall /* jump to handler */
99: b ret_from_kernel_syscall
.endm
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 626e716576ce..db931f1167aa 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -131,14 +131,11 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
SAVE_4GPRS(3, r11)
SAVE_2GPRS(7, r11)

- addi r11,r1,STACK_FRAME_OVERHEAD
addi r2,r10,-THREAD
- stw r11,PT_REGS(r10)
/* Check to see if the dbcr0 register is set up to debug. Use the
internal debug mode bit to do this. */
lwz r12,THREAD_DBCR0(r10)
andis. r12,r12,DBCR0_IDM@h
- ACCOUNT_CPU_USER_ENTRY(r2, r11, r12)
beq+ 3f
/* From user and task is ptraced - load up global dbcr0 */
li r12,-1 /* clear all pending debug events */
@@ -157,20 +154,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
stw r12,4(r11)

3:
-#ifdef CONFIG_TRACE_IRQFLAGS
- /*
- * If MSR is changing we need to keep interrupts disabled at this point
- * otherwise we might risk taking an interrupt before we tell lockdep
- * they are enabled.
- */
- lis r10, MSR_KERNEL@h
- ori r10, r10, MSR_KERNEL@l
- rlwimi r10, r9, 0, MSR_EE
-#else
- lis r10, (MSR_KERNEL | MSR_EE)@h
- ori r10, r10, (MSR_KERNEL | MSR_EE)@l
-#endif
- mtmsr r10
b transfer_to_syscall /* jump to handler */
99: b ret_from_kernel_syscall
.endm
--
2.25.0

Next message: Greg Kroah-Hartman: "[PATCH 5.4 09/65] bpf, cgroup: Fix problematic bounds check"
Previous message: Christophe Leroy: "[PATCH v5 11/22] powerpc/syscall: Save r3 in regs->orig_r3"
In reply to: Nicholas Piggin: "Re: [PATCH v5 11/22] powerpc/syscall: Save r3 in regs->orig_r3"
Next in thread: Christophe Leroy: "[PATCH v5 21/22] powerpc/32: Remove the counter in global_dbcr0"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]