Re: [PATCH v2 11/11] clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting

[Stephen Boyd]

Quoting AngeloGioacchino Del Regno (2021-01-14 14:10:59)
> The GPU PLL0 is not a fixed PLL and the rate can be set on it:
> this is necessary especially on boards which bootloader is setting
> a very low rate on this PLL before booting Linux, which would be
> unsuitable for postdividing to reach the maximum allowed Adreno GPU
> frequency of 710MHz (or, actually, even 670MHz..) on this SoC.
> 
> To allow setting rates on the GPU PLL0, also define VCO boundaries
> and set the CLK_SET_RATE_PARENT flag to the GPU PLL0 postdivider.
> 
> With this change, the Adreno GPU is now able to scale through all
> the available frequencies.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> ---

Applied to clk-next