[PATCH v3 3/3] bus: mhi: core: Process execution environment changes serially

[Bhaumik Bhatt]

In current design, whenever the BHI interrupt is fired, the
execution environment is updated. This can cause race conditions
and impede any ongoing power up/down processing. For example, if
a power down is in progress, MHI host updates the execution
environment to a local "disabled" state. If a BHI interrupt fires
later, the value gets replaced with one from the BHI EE register.
This impacts the controller as it does not expect multiple RDDM
execution environment change status callbacks as an example.
Another issue would be that the device can enter mission mode and
the execution environment is updated, while device creation for
SBL channels is still going on due to slower PM state worker
thread run, leading to multiple attempts at opening the same IPCR
channel.

Ensure that EE changes are handled only from appropriate places and
occur one after another and handle only PBL or RDDM EE changes as
critical events directly from the interrupt handler. This also makes
sure that we use the correct execution environment to notify the
controller driver when the device resets to one of the PBL execution
environments.

Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
---
 drivers/bus/mhi/core/main.c | 14 ++++++++------
 drivers/bus/mhi/core/pm.c   |  5 +++--
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index a73ca03..69401ab 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -423,7 +423,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	enum mhi_state state = MHI_STATE_MAX;
 	enum mhi_pm_state pm_state = 0;
-	enum mhi_ee_type ee = 0;
+	enum mhi_ee_type ee = MHI_EE_MAX;
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
@@ -432,8 +432,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	}
 
 	state = mhi_get_mhi_state(mhi_cntrl);
-	ee = mhi_cntrl->ee;
-	mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+	ee = mhi_get_exec_env(mhi_cntrl);
 	dev_dbg(dev, "local ee:%s device ee:%s dev_state:%s\n",
 		TO_MHI_EXEC_STR(mhi_cntrl->ee), TO_MHI_EXEC_STR(ee),
 		TO_MHI_STATE_STR(state));
@@ -451,8 +450,9 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		if (!mhi_is_active(mhi_cntrl))
 			goto exit_intvec;
 
-		if (mhi_cntrl->ee == MHI_EE_RDDM && mhi_cntrl->ee != ee) {
+		if (ee == MHI_EE_RDDM && mhi_cntrl->ee != MHI_EE_RDDM) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+			mhi_cntrl->ee = ee;
 			wake_up_all(&mhi_cntrl->state_event);
 		}
 		goto exit_intvec;
@@ -462,10 +462,12 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		wake_up_all(&mhi_cntrl->state_event);
 
 		/* For fatal errors, we let controller decide next step */
-		if (MHI_IN_PBL(ee))
+		if (MHI_IN_PBL(ee)) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
-		else
+			mhi_cntrl->ee = ee;
+		} else {
 			mhi_pm_sys_err_handler(mhi_cntrl);
+		}
 	}
 
 exit_intvec:
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 44aa7eb..c870fa8 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -384,14 +384,15 @@ static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
-		mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+		ee = mhi_get_exec_env(mhi_cntrl);
 
-	if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+	if (!MHI_IN_MISSION_MODE(ee)) {
 		mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
 		write_unlock_irq(&mhi_cntrl->pm_lock);
 		wake_up_all(&mhi_cntrl->state_event);
 		return -EIO;
 	}
+	mhi_cntrl->ee = ee;
 	write_unlock_irq(&mhi_cntrl->pm_lock);
 
 	wake_up_all(&mhi_cntrl->state_event);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project