Re: [PATCH v1] vdpa/mlx5: Restore the hardware used index after change map
From: Jason Wang
Date: Tue Feb 09 2021 - 01:39:43 EST
On 2021/2/9 下午2:12, Eli Cohen wrote:
On Tue, Feb 09, 2021 at 11:20:14AM +0800, Jason Wang wrote:
On 2021/2/8 下午6:04, Eli Cohen wrote:
On Mon, Feb 08, 2021 at 05:04:27PM +0800, Jason Wang wrote:
On 2021/2/8 下午2:37, Eli Cohen wrote:
On Mon, Feb 08, 2021 at 12:27:18PM +0800, Jason Wang wrote:
On 2021/2/6 上午7:07, Si-Wei Liu wrote:
On 2/3/2021 11:36 PM, Eli Cohen wrote:
When a change of memory map occurs, the hardware resources are destroyed
and then re-created again with the new memory map. In such case, we need
to restore the hardware available and used indices. The driver failed to
restore the used index which is added here.
Also, since the driver also fails to reset the available and used
indices upon device reset, fix this here to avoid regression caused by
the fact that used index may not be zero upon device reset.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5
devices")
Signed-off-by: Eli Cohen<elic@xxxxxxxxxx>
---
v0 -> v1:
Clear indices upon device reset
drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 88dde3455bfd..b5fe6d2ad22f 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -87,6 +87,7 @@ struct mlx5_vq_restore_info {
u64 device_addr;
u64 driver_addr;
u16 avail_index;
+ u16 used_index;
bool ready;
struct vdpa_callback cb;
bool restore;
@@ -121,6 +122,7 @@ struct mlx5_vdpa_virtqueue {
u32 virtq_id;
struct mlx5_vdpa_net *ndev;
u16 avail_idx;
+ u16 used_idx;
int fw_state;
/* keep last in the struct */
@@ -804,6 +806,7 @@ static int create_virtqueue(struct mlx5_vdpa_net
*ndev, struct mlx5_vdpa_virtque
obj_context = MLX5_ADDR_OF(create_virtio_net_q_in, in,
obj_context);
MLX5_SET(virtio_net_q_object, obj_context, hw_available_index,
mvq->avail_idx);
+ MLX5_SET(virtio_net_q_object, obj_context, hw_used_index,
mvq->used_idx);
MLX5_SET(virtio_net_q_object, obj_context,
queue_feature_bit_mask_12_3,
get_features_12_3(ndev->mvdev.actual_features));
vq_ctx = MLX5_ADDR_OF(virtio_net_q_object, obj_context,
virtio_q_context);
@@ -1022,6 +1025,7 @@ static int connect_qps(struct mlx5_vdpa_net
*ndev, struct mlx5_vdpa_virtqueue *m
struct mlx5_virtq_attr {
u8 state;
u16 available_index;
+ u16 used_index;
};
static int query_virtqueue(struct mlx5_vdpa_net *ndev, struct
mlx5_vdpa_virtqueue *mvq,
@@ -1052,6 +1056,7 @@ static int query_virtqueue(struct
mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqueu
memset(attr, 0, sizeof(*attr));
attr->state = MLX5_GET(virtio_net_q_object, obj_context, state);
attr->available_index = MLX5_GET(virtio_net_q_object,
obj_context, hw_available_index);
+ attr->used_index = MLX5_GET(virtio_net_q_object, obj_context,
hw_used_index);
kfree(out);
return 0;
@@ -1535,6 +1540,16 @@ static void teardown_virtqueues(struct
mlx5_vdpa_net *ndev)
}
}
+static void clear_virtqueues(struct mlx5_vdpa_net *ndev)
+{
+ int i;
+
+ for (i = ndev->mvdev.max_vqs - 1; i >= 0; i--) {
+ ndev->vqs[i].avail_idx = 0;
+ ndev->vqs[i].used_idx = 0;
+ }
+}
+
/* TODO: cross-endian support */
static inline bool mlx5_vdpa_is_little_endian(struct mlx5_vdpa_dev
*mvdev)
{
@@ -1610,6 +1625,7 @@ static int save_channel_info(struct
mlx5_vdpa_net *ndev, struct mlx5_vdpa_virtqu
return err;
ri->avail_index = attr.available_index;
+ ri->used_index = attr.used_index;
ri->ready = mvq->ready;
ri->num_ent = mvq->num_ent;
ri->desc_addr = mvq->desc_addr;
@@ -1654,6 +1670,7 @@ static void restore_channels_info(struct
mlx5_vdpa_net *ndev)
continue;
mvq->avail_idx = ri->avail_index;
+ mvq->used_idx = ri->used_index;
mvq->ready = ri->ready;
mvq->num_ent = ri->num_ent;
mvq->desc_addr = ri->desc_addr;
@@ -1768,6 +1785,7 @@ static void mlx5_vdpa_set_status(struct
vdpa_device *vdev, u8 status)
if (!status) {
mlx5_vdpa_info(mvdev, "performing device reset\n");
teardown_driver(ndev);
+ clear_virtqueues(ndev);
The clearing looks fine at the first glance, as it aligns with the other
state cleanups floating around at the same place. However, the thing is
get_vq_state() is supposed to be called right after to get sync'ed with
the latest internal avail_index from device while vq is stopped. The
index was saved in the driver software at vq suspension, but before the
virtq object is destroyed. We shouldn't clear the avail_index too early.
Good point.
There's a limitation on the virtio spec and vDPA framework that we can not
simply differ device suspending from device reset.
Are you talking about live migration where you reset the device but
still want to know how far it progressed in order to continue from the
same place in the new VM?
Yes. So if we want to support live migration at we need:
in src node:
1) suspend the device
2) get last_avail_idx via get_vq_state()
in the dst node:
3) set last_avail_idx via set_vq_state()
4) resume the device
So you can see, step 2 requires the device/driver not to forget the
last_avail_idx.
Just to be sure, what really matters here is the used index. Becuase the
vriqtueue itself is copied from the src VM to the dest VM. The available
index is alreay there and we know the hardware reads it from there.
So for "last_avail_idx" I meant the hardware internal avail index. It's not
stored in the virtqueue so we must migrate it from src to dest and set them
through set_vq_state(). Then in the destination, the virtqueue can be
restarted from that index.
Consider this case: driver posted buffers till avail index becomes the
value 50. Hardware is executing but made it till 20 when virtqueue was
suspended due to live migration - this is indicated by hardware used
index equal 20.
So in this case the used index in the virtqueue should be 20? Otherwise
we need not sync used index itself but all the used entries that is not
committed to the used ring.
Now the vritqueue is copied to the new VM and the
hardware now has to continue execution from index 20. We need to tell
the hardware via configuring the last used_index.
If the hardware can not sync the index from the virtqueue, the driver
can do the synchronization by make the last_used_idx equals to used
index in the virtqueue.
Thanks
So why don't we
restore the used index?
So it puzzles me why is set_vq_state() we do not communicate the saved
used index.
We don't do that since:
1) if the hardware can sync its internal used index from the virtqueue
during device, then we don't need it
2) if the hardware can not sync its internal used index, the driver (e.g as
you did here) can do that.
But there's no way for the hardware to deduce the internal avail index from
the virtqueue, that's why avail index is sycned.
Thanks