Re: [PATCH mvebu v2 00/10] Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from 1000 MHz

[nnet]

On Tue, Feb 9, 2021, at 5:31 PM, nnet wrote:
> On Tue, Feb 9, 2021, at 3:26 PM, Marek Behún wrote:
> > On Tue, 09 Feb 2021 15:16:45 -0800
> > nnet <nnet@xxxxxxxxxxx> wrote:
> > 
> > > I've two of these and I've just swapped them (and re-pasted the heat sinks).
> > > 
> > > The second one ran under load for awhile and now has frozen as well.
> > > 
> > > Under a moderate load `wget -O /dev/null <large.bin>` @X00Mbits they are fine.
> > > 
> > > Under a 1 min speed test of load ~200Mbits routed WireGuard they freeze.
> > > 
> > > They fine with both those workloads @1000_800.
> > > 
> > > Perhaps it's heat? Unfortunately I don't have any numbers on that ATM.
> > 
> > Try disabling cpufreq in kernel completely, compile boot image at
> > 1200 MHz. If it continues freezing, then I fear we can't help you with
> > 1200 MHz :(
> 
> cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies 
> 200000 300000 600000 1200000 
> 
> I'm not getting any freezes with 1.2GHz fixed after 20 minutes of load:
> 
> echo 1200000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
> 
> Setting it back to min 200MHz I get a freeze within a minute:
> 
> echo 200000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
> 
> > Marek
> >

> +#define MIN_VOLT_MV_FOR_L0_L1_1GHZ 1108

Based on the below at boot time might an equivalent of the above need to be 1225 for 1.2GHz?

1200_750
SVC REV: 5, CPU VDD voltage: 1.225V

1000_800
SVC REV: 5, CPU VDD voltage: 1.108V