Re: [PATCH v6 10/22] clk: mediatek: Add MT8192 basic clocks support

[Matthias Brugger]

On 22/12/2020 14:09, Weiyi Lu wrote:
> Add MT8192 basic clock providers, include topckgen, apmixedsys,
> infracfg and pericfg.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> ---
>  drivers/clk/mediatek/Kconfig      |    8 +
>  drivers/clk/mediatek/Makefile     |    1 +
>  drivers/clk/mediatek/clk-mt8192.c | 1326 +++++++++++++++++++++++++++++++++++++
>  drivers/clk/mediatek/clk-mux.h    |   15 +
>  4 files changed, 1350 insertions(+)
>  create mode 100644 drivers/clk/mediatek/clk-mt8192.c
> 

[...]

> +static int clk_mt8192_apmixed_probe(struct platform_device *pdev)
> +{
> +	struct clk_onecell_data *clk_data;
> +	struct device_node *node = pdev->dev.of_node;
> +	int r;
> +
> +	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
> +	if (!clk_data)
> +		return -ENOMEM;
> +
> +	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
> +	r = mtk_clk_register_gates(node, apmixed_clks, ARRAY_SIZE(apmixed_clks), clk_data);
> +	if (r)
> +		return r;
> +
> +	return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> +}
> +
> +static const struct of_device_id of_match_clk_mt8192[] = {
> +	{
> +		.compatible = "mediatek,mt8192-apmixedsys",
> +		.data = clk_mt8192_apmixed_probe,
> +	}, {
> +		.compatible = "mediatek,mt8192-topckgen",
> +		.data = clk_mt8192_top_probe,
> +	}, {
> +		.compatible = "mediatek,mt8192-infracfg",
> +		.data = clk_mt8192_infra_probe,
> +	}, {
> +		.compatible = "mediatek,mt8192-pericfg",
> +		.data = clk_mt8192_peri_probe,
> +	}, {
> +		/* sentinel */
> +	}
> +};
> +
> +static int clk_mt8192_probe(struct platform_device *pdev)
> +{
> +	int (*clk_probe)(struct platform_device *pdev);
> +	int r;
> +
> +	clk_probe = of_device_get_match_data(&pdev->dev);
> +	if (!clk_probe)
> +		return -EINVAL;
> +
> +	r = clk_probe(pdev);
> +	if (r)
> +		dev_err(&pdev->dev, "could not register clock provider: %s: %d\n", pdev->name, r);
> +
> +	return r;
> +}
> +
> +static struct platform_driver clk_mt8192_drv = {
> +	.probe = clk_mt8192_probe,
> +	.driver = {
> +		.name = "clk-mt8192",
> +		.of_match_table = of_match_clk_mt8192,
> +	},
> +};
> +
> +static int __init clk_mt8192_init(void)
> +{
> +	return platform_driver_register(&clk_mt8192_drv);
> +}
> +
> +arch_initcall(clk_mt8192_init);

Do we really need all these clocks that early?
Why don't we use CLK_OF_DECLARE_DRIVER() then and why do we initialize some
clocks CLK_OF_DECLARE_DRIVER and other with arch_initcall?

I know that this is in other drivers for MediaTek SoCs, but that does not mean
it's the right approach.


> diff --git a/drivers/clk/mediatek/clk-mux.h b/drivers/clk/mediatek/clk-mux.h
> index f5625f4..afbc7df 100644
> --- a/drivers/clk/mediatek/clk-mux.h
> +++ b/drivers/clk/mediatek/clk-mux.h
> @@ -77,6 +77,21 @@ struct mtk_mux {
>  			_width, _gate, _upd_ofs, _upd,			\
>  			CLK_SET_RATE_PARENT)
>  
> +#define MUX_CLR_SET_UPD_FLAGS(_id, _name, _parents, _mux_ofs,		\
> +			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
> +			_upd_ofs, _upd, _flags)				\
> +		GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents, _mux_ofs,	\
> +			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
> +			0, _upd_ofs, _upd, _flags,			\
> +			mtk_mux_clr_set_upd_ops)
> +
> +#define MUX_CLR_SET_UPD(_id, _name, _parents, _mux_ofs,			\
> +			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
> +			_upd_ofs, _upd)					\
> +		MUX_CLR_SET_UPD_FLAGS(_id, _name, _parents,		\
> +			_mux_ofs, _mux_set_ofs, _mux_clr_ofs, _shift,	\
> +			_width, _upd_ofs, _upd,	CLK_SET_RATE_PARENT)
> +

Why can't we do something like:

#define MUX_CLR_SET_UPD(_id, _name, _parents, _mux_ofs,			\
			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
			_upd_ofs, _upd)					\
		GATE_CLR_SET_UPD_FLAGS(_id, _name, _parents, _mux_ofs,	\
			_mux_set_ofs, _mux_clr_ofs, _shift, _width,	\
			0, _upd_ofs, _upd, CLK_SET_RATE_PARENT,			\
			mtk_mux_clr_set_upd_ops)

>  struct clk *mtk_clk_register_mux(const struct mtk_mux *mux,
>  				 struct regmap *regmap,
>  				 spinlock_t *lock);
>