Re: [PATCH v2 01/12] fix: arm64: dts: replace wrong regulator on ap emmc

From: Russell King - ARM Linux admin
Date: Thu Feb 11 2021 - 06:12:34 EST


On Wed, Feb 10, 2021 at 04:09:38PM +0200, kostap@xxxxxxxxxxx wrote:
> From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
>
> Replace wrong regulator in AP0 eMMC definition on MacchiatoBIN
> board with 3.3V regulator.
> The MacchiatoBIN board has no 1.8V regulator connected to AP0
> eMMC (ap0_sdhci0) interface.

There seems to be some variability between Macchiatobin versions
according to the schematics.

The VDDO_H supply is connected to the eMMC VCCQ pins, and is also
connected to the AP_VDDO_H pins. It is wired to the 1.8V regulator
on rev 1.1 schematics, but hard-wired to the 3.3V regulator on
rev 1.3 schematics.

This needs clarification from SolidRun before the patch can be
accepted - was VDDO_H ever wired to the 1.8V regulator on production
hardware?

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!