Re: [EXT] Re: [PATCH v2 01/12] fix: arm64: dts: replace wrong regulator on ap emmc

[Russell King - ARM Linux admin]

On Thu, Feb 11, 2021 at 01:57:25PM +0000, Kostya Porotchkin wrote:
> 
> > ----------------------------------------------------------------------
> > On Wed, Feb 10, 2021 at 04:09:38PM +0200, kostap@xxxxxxxxxxx wrote:
> > > From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>
> > >
> > > Replace wrong regulator in AP0 eMMC definition on MacchiatoBIN board
> > > with 3.3V regulator.
> > > The MacchiatoBIN board has no 1.8V regulator connected to AP0 eMMC
> > > (ap0_sdhci0) interface.
> > 
> > There seems to be some variability between Macchiatobin versions according
> > to the schematics.
> > 
> > The VDDO_H supply is connected to the eMMC VCCQ pins, and is also
> > connected to the AP_VDDO_H pins. It is wired to the 1.8V regulator on rev 1.1
> > schematics, but hard-wired to the 3.3V regulator on rev 1.3 schematics.
> > 
> > This needs clarification from SolidRun before the patch can be accepted - was
> > VDDO_H ever wired to the 1.8V regulator on production hardware?
> > 
> [KP] I will try to find a relevant contact in SolidRun for get this issue clarified.

I've already added Jon Nettleton.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!