[PATCH v2 0/4] arm64: Add TI AM65x-based IOT2050 boards

[Jan Kiszka]

Changes in v2:
 - address board-specific issues found by kernel_verify_patch
 - remove dead l2-cache node from iot2050-basic DT
 - add binding for Siemens vendor prefix
 - factor out board bindings into separate patch
 - add missing device_type to common ti,am654-pcie-rc nodes

Jan

Jan Kiszka (4):
  dt-bindings: Add Siemens vendor prefix
  dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards
  arm64: dts: ti: Add support for Siemens IOT2050 boards
  arm64: dts: ti: k3-am65-main: Add device_type to pcie*_rc nodes

 .../devicetree/bindings/arm/ti/k3.yaml        |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 679 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |   2 +
 .../boot/dts/ti/k3-am6528-iot2050-basic.dts   |  61 ++
 .../dts/ti/k3-am6548-iot2050-advanced.dts     |  60 ++
 7 files changed, 808 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts

-- 
2.26.2