Re: [PATCH] net: phy: micrel: reconfigure the phy on resume

[Pavel Machek]

On Thu 2021-02-11 13:36:16, Heiner Kallweit wrote:
> On 11.02.2021 13:17, Pavel Machek wrote:
> > On Thu 2021-01-14 12:05:21, Heiner Kallweit wrote:
> >> On 14.01.2021 11:41, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
> >>>
> >>>
> >>> On 14.01.2021 12:25, Russell King - ARM Linux admin wrote:
> >>>>
> >>>> As I've said, if phylib/PHY driver is not restoring the state of the
> >>>> PHY on resume from suspend-to-ram, then that's an issue with phylib
> >>>> and/or the phy driver.
> >>>
> >>> In the patch I proposed in this thread the restoring is done in PHY driver.
> >>> Do you think I should continue the investigation and check if something
> >>> should be done from the phylib itself?
> >>>
> >> It was the right move to approach the PM maintainers to clarify whether
> >> the resume PM callback has to assume that power had been cut off and
> >> it has to completely reconfigure the device. If they confirm this
> >> understanding, then:
> > 
> > Power to some devices can be cut during s2ram, yes.
> > 
> Thanks for the confirmation.
> 
> >> - the general question remains why there's separate resume and restore
> >>   callbacks, and what restore is supposed to do that resume doesn't
> >>   have to do
> > 
> > You'll often have same implementation, yes.
> > 
> 
> If resume and restore both have to assume that power was cut off,
> then they have to fully re-initialize the device. Therefore it's still
> not clear to me when you would have differing implementations for both
> callbacks.

Full re-init is easiest way, yes.

But restore had different Linux kernel already booting on device, and
maybe touching the hardware, and resume may or may not cut power to
all devices.

So yes they can be different.

Regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek

Attachment: signature.asc
Description: Digital signature