Re: [PATCH] pinctrl: Support pin that does not support configuration option

[Michael Nazzareno Trimarchi]

Hi

On Fri, Feb 12, 2021 at 9:26 AM Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>
> On Mon, Feb 1, 2021 at 12:54 PM Michael Nazzareno Trimarchi
> <michael@xxxxxxxxxxxxxxxxxxxx> wrote:
> > On Mon, Feb 1, 2021 at 12:47 PM Fabio Estevam <festevam@xxxxxxxxx> wrote:
> > >
> > > Hi Michael,
> > >
> > > On Sat, Jan 30, 2021 at 5:21 AM Michael Trimarchi
> > > <michael@xxxxxxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > Some of the iMX25 pins have not an associated configuration register so
> > > > when they are configured the standard way through the device tree the
> > > > kernel complains with:
> > > >
> > > > imx25-pinctrl 43fac000.iomuxc: Pin(MX25_PAD_EXT_ARMCLK) does not support
> > > > config function
> > >
> > > Could you please share your device tree that causes this warning?
> > >
> > > Shouldn't you pass 0x80000000 in the devicetree for this pad then?
> > >
> > > 0x80000000 means that the kernel should not touch the PAD_CTL register
> > > and use the default configuration from the bootloader/POR.
> >
> > arch/arm/boot/dts/imx25-lisa.dts:
> > MX25_PAD_EXT_ARMCLK__GPIO_3_15  0x80000000
> >
> > The problem that exists pad that can be muxed but not configured
>
> Did you reach any conclusion on this?
>
> I need Fabio's consent to apply the patch, but it seems maybe the
> DTS should be changed instead?
>

Let me re-check with the latest linux code. I did not find any change
there. It's on my side
now

Michael

> Yours,
> Linus Walleij



-- 
Michael Nazzareno Trimarchi
Amarula Solutions BV
COO Co-Founder
Cruquiuskade 47 Amsterdam 1018 AM NL
T. +31(0)851119172
M. +39(0)3479132170
[`as] https://www.amarulasolutions.com