[PATCH v5 net-next 07/10] net: dsa: felix: restore multicast flood to CPU when NPI tagger reinitializes

[Vladimir Oltean]

From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

ocelot_init sets up PGID_MC to include the CPU port module, and that is
fine, but the ocelot-8021q tagger removes the CPU port module from the
unknown multicast replicator. So after a transition from the default
ocelot tagger towards ocelot-8021q and then again towards ocelot,
multicast flooding towards the CPU port module will be disabled.

Fixes: e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
Changes in v5:
Patch is new.

 drivers/net/dsa/ocelot/felix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 386468e66c41..ae11d3f030ac 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -411,6 +411,7 @@ static int felix_setup_tag_npi(struct dsa_switch *ds, int cpu)
 	 */
 	cpu_flood = ANA_PGID_PGID_PGID(BIT(ocelot->num_phys_ports));
 	ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_UC);
+	ocelot_rmw_rix(ocelot, cpu_flood, cpu_flood, ANA_PGID_PGID, PGID_MC);
 
 	return 0;
 }
-- 
2.25.1