[PATCH v2 0/4] Add support for CP110 UTMI PHY

From: kostap
Date: Sun Feb 14 2021 - 11:02:32 EST


From: Konstantin Porotchkin <kostap@xxxxxxxxxxx>

This series of patches adds a new PHY driver for supporting CP110 UTMI
PHY in Linux. Currently the functionality of USB ports connected to
this PHY depends on boot loader setup.
The new driver eliminates kernel configuration dependency from the boot
loader.

v2:
- extend the comment about reference clock
- fix driver probe function, add some prints
- move to usage of dr_mode from connected USB controller instead of
dedicated device tree property

Konstantin Porotchkin (4):
drivers: phy: add support for Armada CP110 UTMI PHY
devicetree/bindings: add support for CP110 UTMI driver
arch/arm64: dts: add support for Marvell CP110 UTMI driver
arch/arm64: dts: enable CP110 UTMI driver

.../bindings/phy/phy-mvebu-utmi.txt | 78 +++-
.../arm64/boot/dts/marvell/armada-7040-db.dts | 14 +-
.../arm64/boot/dts/marvell/armada-8040-db.dts | 21 +-
.../boot/dts/marvell/armada-8040-mcbin.dtsi | 19 +-
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 19 +
arch/arm64/boot/dts/marvell/cn9130-db.dts | 12 +-
arch/arm64/boot/dts/marvell/cn9131-db.dts | 9 +-
arch/arm64/boot/dts/marvell/cn9132-db.dts | 11 +-
drivers/phy/marvell/Kconfig | 8 +
drivers/phy/marvell/Makefile | 1 +
drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 384 ++++++++++++++++++
11 files changed, 556 insertions(+), 20 deletions(-)
create mode 100644 drivers/phy/marvell/phy-mvebu-cp110-utmi.c

--
2.17.1