Re: [PATCH 1/2] v4l2-ctrl: Add decoder conceal color control

[Hans Verkuil]

On 15/02/2021 12:32, Stanimir Varbanov wrote:
> 
> 
> On 2/9/21 1:05 PM, Hans Verkuil wrote:
>> On 09/02/2021 10:45, Stanimir Varbanov wrote:
>>> Add decoder v4l2 control to set conceal color.
>>>
>>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
>>> ---
>>>  .../media/v4l/ext-ctrls-codec.rst             | 20 +++++++++++++++++++
>>>  drivers/media/v4l2-core/v4l2-ctrls.c          |  9 +++++++++
>>>  include/uapi/linux/v4l2-controls.h            |  1 +
>>>  3 files changed, 30 insertions(+)
>>>
>>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> index 00944e97d638..994650052333 100644
>>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> @@ -674,6 +674,26 @@ enum v4l2_mpeg_video_frame_skip_mode -
>>>      is currently displayed (decoded). This value is reset to 0 whenever
>>>      the decoder is started.
>>>  
>>> +``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)``
>>> +    This control sets conceal color in YUV color space. It describes the
>>> +    client preference of error conceal color in case of error where
>>> +    reference frame is missing. The decoder would paint the reference
>>> +    buffer with preferred color and use it for future decoding.
>>> +    Applicable to decoders.
>>
>> You should mention explicitly that this is using 16-bit color components
>> and expects Limited Range.
> 
> I don't want to limit the client to Limited range only. I'll mention in
> the description that both ranges are valid.

OK, but then you need to describe what the color format depends on. See more
below.

> 
>>
>>> +
>>> +.. flat-table::
>>> +    :header-rows:  0
>>> +    :stub-columns: 0
>>> +
>>> +    * - Bit 0:15
>>> +      - Y luminance
>>> +    * - Bit 16:31
>>> +      - Cb chrominance
>>> +    * - Bit 32:47
>>> +      - Cr chrominance
>>> +    * - Bit 48:63
>>> +      - Must be zero
>>> +
>>>  ``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)``
>>>      If enabled the decoder expects to receive a single slice per buffer,
>>>      otherwise the decoder expects a single frame in per buffer.
>>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
>>> index 016cf6204cbb..a3b9d28a00b7 100644
>>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
>>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
>>> @@ -945,6 +945,7 @@ const char *v4l2_ctrl_get_name(u32 id)
>>>  	case V4L2_CID_MPEG_VIDEO_VBV_SIZE:			return "VBV Buffer Size";
>>>  	case V4L2_CID_MPEG_VIDEO_DEC_PTS:			return "Video Decoder PTS";
>>>  	case V4L2_CID_MPEG_VIDEO_DEC_FRAME:			return "Video Decoder Frame Count";
>>> +	case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR:		return "Video Decoder Conceal Color";
>>>  	case V4L2_CID_MPEG_VIDEO_VBV_DELAY:			return "Initial Delay for VBV Control";
>>>  	case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:		return "Horizontal MV Search Range";
>>>  	case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:		return "Vertical MV Search Range";
>>> @@ -1430,6 +1431,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
>>>  		*max = 0x7fffffffffffffffLL;
>>>  		*step = 1;
>>>  		break;
>>> +	case V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR:
>>> +		*type = V4L2_CTRL_TYPE_INTEGER64;
>>> +		*min = 0;
>>> +		/* default for 8bit black, luma is 16, chroma is 128 */
>>
>> Since this is 16 bit the actual default luma value for black is 4096 and for chroma use
>> 32768 (i.e. both values are times 256).
> 
> If we follow this for pixel format with 10bit per channel we have to
> multiply by 64?

No, you multiply by 4. 12 bit depth will multiple by 16, and 16 bit depth by 256.

But how do you format this? Using bits 29-0? Or use 9-0 for one color component,
25-16 for another and 41-32 for the last component?

Also missing is an explanation of which bits are for Y', which for Cb and which for Cr.

It is surprisingly hard to provide an unambiguous description of this :-)

Regards,

	Hans

> 
>>
>>> +		*def = 0x8000800010LL;
>>> +		*max = 0xffffffffffffLL;
>>> +		*step = 1;
>>> +		break;
>>>  	case V4L2_CID_PIXEL_RATE:
>>>  		*type = V4L2_CTRL_TYPE_INTEGER64;
>>>  		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
>>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
>>> index 039c0d7add1b..5e5a3068be2d 100644
>>> --- a/include/uapi/linux/v4l2-controls.h
>>> +++ b/include/uapi/linux/v4l2-controls.h
>>> @@ -428,6 +428,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
>>>  #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+228)
>>>  #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME		(V4L2_CID_CODEC_BASE+229)
>>>  #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID	(V4L2_CID_CODEC_BASE+230)
>>> +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR		(V4L2_CID_CODEC_BASE+231)
>>>  
>>>  /* CIDs for the MPEG-2 Part 2 (H.262) codec */
>>>  #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)
>>>
>>
>> Regards,
>>
>> 	Hans
>>
>