[PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Jonathan Marek
Date: Mon Feb 15 2021 - 12:29:16 EST


Apply these fixes to the newly added sm8250 display ndoes
- Use sm8250 compatibles instead of sdm845 compatibles
- Remove "notused" interconnect (which apparently was blindly copied from
my old patches)
- Use dispcc node example from dt-bindings, removing clocks which aren't
documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
1 file changed, 8 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
};

mdss: mdss@ae00000 {
- compatible = "qcom,sdm845-mdss";
+ compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";

- interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
- <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
- interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+ interconnect-names = "mdp0-mem", "mdp1-mem";

power-domains = <&dispcc MDSS_GDSC>;

@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
ranges;

mdss_mdp: mdp@ae01000 {
- compatible = "qcom,sdm845-dpu";
+ compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {

dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
- reg = <0 0x0af00000 0 0x20000>;
+ reg = <0 0x0af00000 0 0x10000>;
mmcx-supply = <&mmcx_reg>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
<&dsi1_phy 0>,
<&dsi1_phy 1>,
<0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <&sleep_clk>;
+ <0>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux",
- "dptx1_phy_pll_link_clk",
- "dptx1_phy_pll_vco_div_clk",
- "dptx2_phy_pll_link_clk",
- "dptx2_phy_pll_vco_div_clk",
- "edp_phy_pll_link_clk",
- "edp_phy_pll_vco_div_clk",
- "sleep_clk";
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.26.1