Re: [PATCH v4 4/4] arm: dts: visconti: Add DT support for Toshiba Visconti5 ethernet controller

[Naresh Kamboju]

Hi Nobuhiro,


On Mon, 15 Feb 2021 at 21:00, Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@xxxxxxxxxxxxx> wrote:
>
> Add the ethernet controller node in Toshiba Visconti5 SoC-specific DT file.
> And enable this node in TMPV7708 RM main board's board-specific DT file.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
> ---
>  .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts     | 18 +++++++++++++
>  arch/arm64/boot/dts/toshiba/tmpv7708.dtsi     | 25 +++++++++++++++++++
>  2 files changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> index ed0bf7f13f54..48fa8776e36f 100644
> --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
> @@ -41,3 +41,21 @@ &uart1 {
>         clocks = <&uart_clk>;
>         clock-names = "apb_pclk";
>  };
> +
> +&piether {
> +       status = "okay";
> +       phy-handle = <&phy0>;
> +       phy-mode = "rgmii-id";
> +       clocks = <&clk300mhz>, <&clk125mhz>;
> +       clock-names = "stmmaceth", "phy_ref_clk";
> +
> +       mdio0 {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               compatible = "snps,dwmac-mdio";
> +               phy0: ethernet-phy@1 {
> +                       device_type = "ethernet-phy";
> +                       reg = <0x1>;

This build error was noticed on LKFT builder while building arm64 dtb
on linux next 20210216 tag.

arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
FATAL ERROR: Unable to parse input tree

Reported-by: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>

https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382

--
Linaro LKFT
https://lkft.linaro.org