RE: linux-next: manual merge of the net-next tree with the arm-soc tree

[nobuhiro1.iwamatsu]

Hi,

Thnaks for your report.

> LKFT builders also found this problem while building arm64 dtb.
> 
> > This ` causes the following build error on the next-20210216.
> >
> >   DTC     arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb
> > Error: arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts:52.3-4 syntax error
> > FATAL ERROR: Unable to parse input tree
> > scripts/Makefile.lib:336: recipe for target 'arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb' failed
> > make[2]: *** [arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dtb] Error 1
> > scripts/Makefile.build:530: recipe for target 'arch/arm64/boot/dts/toshiba' failed
> 
> ref:
> https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/jobs/1033072509#L382
> 

This seems to be a problem fixing the conflict.

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=c5e188ea08290d9b6625b4bef322012c0b1902d7

```
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
index 2407b2d89c1e9..3760df93a89b5 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -49,4 +49,22 @@
 
 &gpio {
 	status = "okay";
+};`
+
+&piether {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	clocks = <&clk300mhz>, <&clk125mhz>;
+	clock-names = "stmmaceth", "phy_ref_clk";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@1 {
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
 };
```

Stephen, could you fix this?

Best regards,
  Nobuhiro