Re: [PATCH v2 1/2] drm/msm: add compatibles for sm8150/sm8250 display

[Dmitry Baryshkov]

On Mon, 15 Feb 2021 at 19:25, Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> The driver already has support for sm8150/sm8250, but the compatibles were
> never added.
>
> Also inverse the non-mdp4 condition in add_display_components() to avoid
> having to check every new compatible in the condition.
>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
>  Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c               | 2 ++
>  drivers/gpu/drm/msm/msm_drv.c                         | 6 +++---
>  3 files changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> index 551ae26f60da..5763f43200a0 100644
> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
>
>  MDSS:
>  Required properties:
> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
>  - reg: physical base address and length of contoller's registers.
>  - reg-names: register region names. The following region is required:
>    * "mdss"
> @@ -41,7 +41,7 @@ Optional properties:
>
>  MDP:
>  Required properties:
> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
>  - reg: physical base address and length of controller's registers.
>  - reg-names : register region names. The following region is required:
>    * "mdp"

These two chunks should probably go to the separate patch 'dt-bindings:...'.

Also, could you please pinpoint the reason for adding more
compatibility strings, while they map to the same internal data?
I think we might want instead to use some generic name for the dpu
block, like "qcom,dpu" or "qcom,mdp-dpu" instead of specifying the
platform name.


> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 5a8e3e1fc48c..fff12a4c8bfc 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
>  static const struct of_device_id dpu_dt_match[] = {
>         { .compatible = "qcom,sdm845-dpu", },
>         { .compatible = "qcom,sc7180-dpu", },
> +       { .compatible = "qcom,sm8150-dpu", },
> +       { .compatible = "qcom,sm8250-dpu", },
>         {}
>  };
>  MODULE_DEVICE_TABLE(of, dpu_dt_match);
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index 94525ac76d4e..928f13d4bfbc 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
>          * Populate the children devices, find the MDP5/DPU node, and then add
>          * the interfaces to our components list.
>          */
> -       if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
> -           of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
> -           of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
> +       if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
>                 ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
>                 if (ret) {
>                         DRM_DEV_ERROR(dev, "failed to populate children devices\n");
> @@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
>         { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
>         { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
>         { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> +       { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> +       { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
>         {}
>  };
>  MODULE_DEVICE_TABLE(of, dt_match);
> --
> 2.26.1
>


-- 
With best wishes
Dmitry