Re: [PATCH v1] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling

From: Badhri Jagan Sridharan
Date: Fri Feb 19 2021 - 04:13:20 EST


Done. Just sent out the following patch and CCed stable@xxxxxxxxxxxxxxx as well.

[PATCH v2] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling

Thanks,
Badhri


On Thu, Feb 18, 2021 at 2:42 AM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Thu, Feb 18, 2021 at 02:38:45AM -0800, Badhri Jagan Sridharan wrote:
> > Hi Greg,
> >
> > This patch is a bug fix for the following patch which was introduced in 5.11.
> >
> > commit f321a02caebdd0c56e167610cda2fa148cd96e8b
> > Author: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> > Date: Wed Oct 28 23:31:35 2020 -0700
> >
> > usb: typec: tcpm: Implement enabling Auto Discharge disconnect support
> >
> > TCPCI spec allows TCPC hardware to autonomously discharge the vbus
> > capacitance upon disconnect. The expectation is that the TCPM enables
> > AutoDischargeDisconnect while entering SNK/SRC_ATTACHED states. Hardware
> > then automously discharges vbus when the vbus falls below a certain
> > threshold i.e. VBUS_SINK_DISCONNECT_THRESHOLD.
> >
> > Apart from enabling the vbus discharge circuit, AutoDischargeDisconnect
> > is also used a flag to move TCPCI based TCPC implementations into
> > Attached.Snk/Attached.Src state as mentioned in
> > Figure 4-15. TCPC State Diagram before a Connection of the
> > USB Type-C Port Controller Interface Specification.
> > In such TCPC implementations, setting AutoDischargeDisconnect would
> > prevent TCPC into entering "Connection_Invalid" state as well.
> >
> > Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> > Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> > Link: https://lore.kernel.org/r/20201029063138.1429760-8-badhri@xxxxxxxxxx
> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>
> Great, then can you resend the patch and add a proper Fixes: tag, along
> with a cc: stable as well?
>
> thanks,
>
> greg k-h