Re: [PATCH v4 1/4] PCI: Introduce pcim_alloc_irq_vectors()

[Dejin Zheng]

On Fri, Feb 19, 2021 at 03:40:05PM +0100, Robert Richter wrote:
> On 18.02.21 23:04:55, Dejin Zheng wrote:
> > Introduce pcim_alloc_irq_vectors(), a device-managed version of
> > pci_alloc_irq_vectors(). Introducing this function can simplify
> > the error handling path in many drivers.
> > 
> > And use pci_free_irq_vectors() to replace some code in pcim_release(),
> > they are equivalent, and no functional change. It is more explicit
> > that pcim_alloc_irq_vectors() is a device-managed function.
> > 
> > Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Signed-off-by: Dejin Zheng <zhengdejin5@xxxxxxxxx>
> > ---
> > v3 -> v4:
> > 	- No change
> > v2 -> v3:
> > 	- Add some commit comments for replace some codes in
> > 	  pcim_release() by pci_free_irq_vectors().
> > v1 -> v2:
> > 	- Use pci_free_irq_vectors() to replace some code in
> > 	  pcim_release().
> > 	- Modify some commit messages.
> > 
> >  drivers/pci/pci.c   | 33 +++++++++++++++++++++++++++++----
> >  include/linux/pci.h |  3 +++
> >  2 files changed, 32 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index b67c4327d307..db799d089c85 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -1969,10 +1969,7 @@ static void pcim_release(struct device *gendev, void *res)
> >  	struct pci_devres *this = res;
> >  	int i;
> >  
> > -	if (dev->msi_enabled)
> > -		pci_disable_msi(dev);
> > -	if (dev->msix_enabled)
> > -		pci_disable_msix(dev);
> > +	pci_free_irq_vectors(dev);
> >  
> >  	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
> >  		if (this->region_mask & (1 << i))
> > @@ -2054,6 +2051,34 @@ void pcim_pin_device(struct pci_dev *pdev)
> >  }
> >  EXPORT_SYMBOL(pcim_pin_device);
> >  
> > +/**
> > + * pcim_alloc_irq_vectors - a device-managed pci_alloc_irq_vectors()
> > + * @dev:		PCI device to operate on
> > + * @min_vecs:		minimum number of vectors required (must be >= 1)
> > + * @max_vecs:		maximum (desired) number of vectors
> > + * @flags:		flags or quirks for the allocation
> > + *
> > + * Return the number of vectors allocated, (which might be smaller than
> > + * @max_vecs) if successful, or a negative error code on error. If less
> > + * than @min_vecs interrupt vectors are available for @dev the function
> > + * will fail with -ENOSPC.
> > + *
> > + * It depends on calling pcim_enable_device() to make IRQ resources
> > + * manageable.
> > + */
> > +int pcim_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
> > +				unsigned int max_vecs, unsigned int flags)
> > +{
> > +	struct pci_devres *dr;
> > +
> > +	dr = find_pci_dr(dev);
> > +	if (!dr || !dr->enabled)
> > +		return -EINVAL;
> > +
> > +	return pci_alloc_irq_vectors(dev, min_vecs, max_vecs, flags);
> > +}
> > +EXPORT_SYMBOL(pcim_alloc_irq_vectors);
> 
> If it is just about having a pcim-* counterpart why not just an inline
> function like the one below.
>
Robert and Andy,

First of all, thank you very much for your suggestions and help.
I think this is not just a pcim-* counterpart, I may not explain this
place clearly. In addition to calling pci_alloc_irq_vectors(), the
pcim_alloc_irq_vectors() function also checks whether the pci device is
enabled and whether the pci device resource has been managed. If any one
is wrong, it will return failure. Therefore, I think it should be used
as a function. For novices, maybe I understand it incorrectly, so I look
forward to your suggestions.

> > +	dr = find_pci_dr(dev);
static struct pci_devres *find_pci_dr(struct pci_dev *pdev)
{
        if (pci_is_managed(pdev))
                return devres_find(&pdev->dev, pcim_release, NULL, NULL);                                                         
        return NULL;
}
here checks whether the pci device resource has been managed.

> > +	if (!dr || !dr->enabled)
here checks whether the pci device is enabled.

int pcim_enable_device(struct pci_dev *pdev)
{
        struct pci_devres *dr;
        int rc;

        dr = get_pci_dr(pdev);
        if (unlikely(!dr))
                return -ENOMEM;
        if (dr->enabled)
                return 0;

        rc = pci_enable_device(pdev);
        if (!rc) {
                pdev->is_managed = 1;
                dr->enabled = 1;
        }
        return rc;
}

BR,
Dejin

> > +
> >  /*
> >   * pcibios_add_device - provide arch specific hooks when adding device dev
> >   * @dev: the PCI device being added
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index 86c799c97b77..d75ba85ddfc5 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -1818,6 +1818,9 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
> >  					      NULL);
> >  }
> >  
> > +int pcim_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
> > +				unsigned int max_vecs, unsigned int flags);
> > +
> 
> static inline int pcim_alloc_irq_vectors(struct pci_dev *dev,
> 	unsigned int min_vecs, unsigned int max_vecs, unsigned int flags)
> {
> 	if (!pci_is_managed(dev, min_vecs, max_vecs, flags))
> 		return -EINVAL;
> 
> 	return pci_alloc_irq_vectors(dev, min_vecs, max_vecs, flags);
> }
> 
> All those stub functions with EXPORT_SYMBOLS etc. could be dropped
> then.
> 
> With some macro magic added a list of functions could easily being
> created that are already managed but just need a pcim* counterpart.
> 
> -Robert
> 
> >  /* Include architecture-dependent settings and functions */
> >  
> >  #include <asm/pci.h>
> > -- 
> > 2.25.0
> >