[PATCH v2] regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting

From: Schrempf Frieder
Date: Mon Feb 22 2021 - 06:55:11 EST


From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.

To fix this we clear the PRESET_EN bit at time of initialization.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Changes in v2:
* Improve comment and commit message
* Use regmap_clear_bits() instead of regmap_update_bits()
* Add error code to log message
---
drivers/regulator/pca9450-regulator.c | 8 ++++++++
include/linux/regulator/pca9450.h | 3 +++
2 files changed, 11 insertions(+)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 833d398c6aa2..d38109cc3a01 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
return ret;
}

+ /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+ ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+ BUCK123_PRESET_EN);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+ return ret;
+ }
+
/* Set reset behavior on assertion of WDOG_B signal */
ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index ccdb5320a240..71902f41c919 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -147,6 +147,9 @@ enum {
#define BUCK6_FPWM 0x04
#define BUCK6_ENMODE_MASK 0x03

+/* PCA9450_REG_BUCK123_PRESET_EN bit */
+#define BUCK123_PRESET_EN 0x80
+
/* PCA9450_BUCK1OUT_DVS0 bits */
#define BUCK1OUT_DVS0_MASK 0x7F
#define BUCK1OUT_DVS0_DEFAULT 0x14
--
2.25.1