[PATCH v4 1/1] phy: fsl-imx8-mipi-dphy: Hook into runtime pm
From: Guido Günther
Date: Mon Feb 22 2021 - 13:39:33 EST
This allows us to shut down the mipi power domain on the imx8. The
alternative would be to drop the dphy from the mipi power domain in the
SOCs device tree and only have the DSI host controller visible there but
since the PD is mostly about the PHY that would defeat it's purpose.
This allows to shut off the power domain hen blanking the LCD panel:
pm_genpd_summary before:
domain status slaves
/device runtime status
----------------------------------------------------------------------
mipi on
/devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy unsupported
/devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
after:
mipi off-0
/devices/platform/soc@0/soc@0:bus@30800000/30a00300.dphy suspended
/devices/platform/soc@0/soc@0:bus@30800000/30a00000.mipi_dsi suspended
Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index a95572b397ca..5de175695834 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -14,6 +14,7 @@
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
/* DPHY registers */
@@ -469,6 +470,8 @@ static int mixel_dphy_probe(struct platform_device *pdev)
dev_set_drvdata(dev, priv);
+ pm_runtime_enable(dev);
+
phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
@@ -481,8 +484,15 @@ static int mixel_dphy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
+static int mixel_dphy_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
static struct platform_driver mixel_dphy_driver = {
.probe = mixel_dphy_probe,
+ .remove = mixel_dphy_remove,
.driver = {
.name = "mixel-mipi-dphy",
.of_match_table = mixel_dphy_of_match,
--
2.30.0