[PATCH] Input: st1232 - Fix NORMAL vs. IDLE state handling

[Geert Uytterhoeven]

NORMAL (0x0) and IDLE (0x4) are really two different states.  Hence you
cannot check for both using a bitmask, as that checks for IDLE only,
breaking operation for devices that are in NORMAL state.

Fix the wait function to report either state as ready.

Fixes: 6524d8eac258452e ("Input: st1232 - add IDLE state as ready condition")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/input/touchscreen/st1232.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 885f0572488dd061..6abae665ca71d8ec 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -94,8 +94,13 @@ static int st1232_ts_wait_ready(struct st1232_ts_data *ts)
 
 	for (retries = 10; retries; retries--) {
 		error = st1232_ts_read_data(ts, REG_STATUS, 1);
-		if (!error && ts->read_buf[0] == (STATUS_NORMAL | STATUS_IDLE | ERROR_NONE))
-			return 0;
+		if (!error) {
+			switch (ts->read_buf[0]) {
+			case STATUS_NORMAL | ERROR_NONE:
+			case STATUS_IDLE | ERROR_NONE:
+				return 0;
+			}
+		}
 
 		usleep_range(1000, 2000);
 	}
-- 
2.25.1