Re: [PATCH] mtd: rawnand: qcom: update last code word register

[Miquel Raynal]

Hello,

Md Sadre Alam <mdalam@xxxxxxxxxxxxxx> wrote on Tue, 23 Feb 2021
01:34:27 +0530:

> From QPIC version 2.0 onwards new register got added to read last

                               a new

> codeword. This change will add the READ_LOCATION_LAST_CW_n register.

            Add support for this READ_LOCATION_LAST_CW_n register.

> 
> For first three code word READ_LOCATION_n register will be
> use.For last code word READ_LOCATION_LAST_CW_n register will be
> use.

"
In the case of QPIC v2, codewords 0, 1 and 2 will be accessed through
READ_LOCATION_n, while codeword 3 will be accessed through
READ_LOCATION_LAST_CW_n.
"

When I read my own sentence, I feel that there is something wrong.
If there are only 4 codewords, I guess a QPIC v2 is able to use
READ_LOCATION_3 or READ_LOCATION_LAST_CW_0 interchangeably. Isn't it?

I guess the point of having these "last_cw_n" registers is to support
up to 8 codewords, am I wrong? If this the case, the current patch
completely fails doing that I don't get the point of such change.

> Signed-off-by: Md Sadre Alam <mdalam@xxxxxxxxxxxxxx>
> ---

[...]

>  /* helper to configure address register values */
> @@ -700,8 +727,9 @@ static void set_address(struct qcom_nand_host *host, u16 column, int page)
>   *
>   * @num_cw:		number of steps for the read/write operation
>   * @read:		read or write operation
> + * @cw	:		which code word
>   */
> -static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
> +static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, int cw)
>  {
>  	struct nand_chip *chip = &host->chip;
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> @@ -740,7 +768,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
>  	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
>  
>  	if (read)
> -		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
> +		nandc_set_read_loc(chip, cw, 0, 0, host->use_ecc ?
>  				   host->cw_data : host->cw_size, 1);
>  }
>  
> @@ -1111,18 +1139,34 @@ static void config_nand_page_read(struct nand_chip *chip)
>  		      NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
>  }
>  
> +/* helper to check which location register should be use for this

    /*
     * Check which location...

> + * code word. NAND_READ_LOCATION or NAND_READ_LOCATION_LAST_CW
> + */
> +static bool config_loc_last_reg(struct nand_chip *chip, int cw)
> +{
> +	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +
> +	if (nandc->props->qpic_v2 && qcom_nandc_is_last_cw(ecc, cw))
> +		return true;

Not sure this is really useful, it's probably better to drop this
helper and just use...

> +
> +	return false;
> +}
>  /*
>   * Helper to prepare DMA descriptors for configuring registers
>   * before reading each codeword in NAND page.
>   */
>  static void
> -config_nand_cw_read(struct nand_chip *chip, bool use_ecc)
> +config_nand_cw_read(struct nand_chip *chip, bool use_ecc, int cw)
>  {
>  	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
> +	int reg = NAND_READ_LOCATION_0;
> +
> +	if (config_loc_last_reg(chip, cw))

...     if (nandc->props->qpic_v2 && qcom_nandc_is_lastcw()) here.

> +		reg = NAND_READ_LOCATION_LAST_CW_0;
>  
>  	if (nandc->props->is_bam)
> -		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
> -			      NAND_BAM_NEXT_SGL);
> +		write_reg_dma(nandc, reg, 4, NAND_BAM_NEXT_SGL);
>  
>  	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
>  	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
> @@ -1142,12 +1186,12 @@ config_nand_cw_read(struct nand_chip *chip, bool use_ecc)

Thanks,
Miquèl