[PATCH 6/6] firmware: qcom_scm: Only compile legacy calls on ARM
From: Stephen Boyd
Date: Tue Feb 23 2021 - 16:47:59 EST
These scm calls are never used outside of legacy ARMv7 based platforms.
That's because PSCI, mandated on arm64, implements them for modern SoCs
via the PSCI spec. Let's move them to the legacy file and only compile
the legacy file into the kernel when CONFIG_ARM=y. Otherwise provide
stubs and fail the calls. This saves a little bit of space in an
arm64 allmodconfig.
$ ./scripts/bloat-o-meter vmlinux.before vmlinux.after
add/remove: 0/8 grow/shrink: 5/7 up/down: 509/-4405 (-3896)
Function old new delta
__qcom_scm_set_dload_mode.constprop 312 452 +140
qcom_scm_qsmmu500_wait_safe_toggle 288 416 +128
qcom_scm_io_writel 288 408 +120
qcom_scm_io_readl 376 492 +116
__param_str_download_mode 23 28 +5
__warned 4327 4326 -1
qcom_iommu_init 272 268 -4
e843419@0b3f_00010432_324 8 - -8
qcom_scm_call 228 208 -20
CSWTCH 5925 5877 -48
_sub_I_65535_1 163100 163040 -60
_sub_D_65535_0 163100 163040 -60
qcom_scm_wb 64 - -64
qcom_scm_lock 320 160 -160
qcom_scm_call_atomic 212 - -212
qcom_scm_cpu_power_down 308 - -308
scm_legacy_call_atomic 520 - -520
qcom_scm_set_warm_boot_addr 720 - -720
qcom_scm_set_cold_boot_addr 728 - -728
scm_legacy_call 1492 - -1492
Total: Before=66737642, After=66733746, chg -0.01%
Commit 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and
legacy conventions") didn't mention any motivating factors for keeping
the legacy code around on arm64 kernels, i.e. presumably that commit
wasn't trying to support these legacy APIs on arm64 kernels.
Cc: Elliot Berman <eberman@xxxxxxxxxxxxxx>
Cc: Brian Masney <masneyb@xxxxxxxxxxxxx>
Cc: Stephan Gerhold <stephan@xxxxxxxxxxx>
Cc: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
drivers/firmware/Makefile | 4 +-
drivers/firmware/qcom_scm-legacy.c | 133 ++++++++++++++++++++++++++
drivers/firmware/qcom_scm.c | 145 +----------------------------
drivers/firmware/qcom_scm.h | 33 +++++++
include/linux/qcom_scm.h | 21 +++--
5 files changed, 183 insertions(+), 153 deletions(-)
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5e013b6a3692..0b7b35555a6c 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,7 +17,9 @@ obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SCM) += qcom_scm_objs.o
+qcom_scm_objs-$(CONFIG_ARM) += qcom_scm-legacy.o
+qcom_scm_objs-$(CONFIG_QCOM_SCM) += qcom_scm.o qcom_scm-smc.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
diff --git a/drivers/firmware/qcom_scm-legacy.c b/drivers/firmware/qcom_scm-legacy.c
index 1829ba220576..d909fa2716bc 100644
--- a/drivers/firmware/qcom_scm-legacy.c
+++ b/drivers/firmware/qcom_scm-legacy.c
@@ -3,6 +3,7 @@
* Copyright (C) 2015 Linaro Ltd.
*/
+#include <linux/cpumask.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -240,3 +241,135 @@ int scm_legacy_call_atomic(struct device *unused,
return smc_res.a0;
}
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct qcom_scm_wb_entry {
+ int flag;
+ void *entry;
+};
+
+static struct qcom_scm_wb_entry qcom_scm_wb[] = {
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int ret;
+ int flags = 0;
+ int cpu;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ };
+
+ /*
+ * Reassign only if we are switching from hotplug entry point
+ * to cpuidle entry point or vice versa.
+ */
+ for_each_cpu(cpu, cpus) {
+ if (entry == qcom_scm_wb[cpu].entry)
+ continue;
+ flags |= qcom_scm_wb[cpu].flag;
+ }
+
+ /* No change in entry function */
+ if (!flags)
+ return 0;
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ ret = scm_legacy_call(__scm->dev, &desc, NULL);
+ if (!ret) {
+ for_each_cpu(cpu, cpus)
+ qcom_scm_wb[cpu].entry = entry;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int flags = 0;
+ int cpu;
+ int scm_cb_flags[] = {
+ QCOM_SCM_FLAG_COLDBOOT_CPU0,
+ QCOM_SCM_FLAG_COLDBOOT_CPU1,
+ QCOM_SCM_FLAG_COLDBOOT_CPU2,
+ QCOM_SCM_FLAG_COLDBOOT_CPU3,
+ };
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ if (!cpus || (cpus && cpumask_empty(cpus)))
+ return -EINVAL;
+
+ for_each_cpu(cpu, cpus) {
+ if (cpu < ARRAY_SIZE(scm_cb_flags))
+ flags |= scm_cb_flags[cpu];
+ else
+ set_cpu_present(cpu, false);
+ }
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ return scm_legacy_call_atomic(NULL, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void qcom_scm_cpu_power_down(u32 flags)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
+ .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ scm_legacy_call_atomic(NULL, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_cpu_power_down);
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ee9cb545e73b..29bce83f8a25 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -4,7 +4,6 @@
*/
#include <linux/platform_device.h>
#include <linux/init.h>
-#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
@@ -26,16 +25,6 @@ module_param(download_mode, bool, 0);
#define SCM_HAS_IFACE_CLK BIT(1)
#define SCM_HAS_BUS_CLK BIT(2)
-struct qcom_scm {
- struct device *dev;
- struct clk *core_clk;
- struct clk *iface_clk;
- struct clk *bus_clk;
- struct reset_controller_dev reset;
-
- u64 dload_mode_addr;
-};
-
struct qcom_scm_current_perm_info {
__le32 vmid;
__le32 perm;
@@ -49,28 +38,6 @@ struct qcom_scm_mem_map_info {
__le64 mem_size;
};
-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_wb_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_wb_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
static const char *qcom_scm_convention_names[] = {
[SMC_CONVENTION_UNKNOWN] = "unknown",
[SMC_CONVENTION_ARM_32] = "smc arm 32",
@@ -78,7 +45,7 @@ static const char *qcom_scm_convention_names[] = {
[SMC_CONVENTION_LEGACY] = "smc legacy",
};
-static struct qcom_scm *__scm;
+struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
{
@@ -260,116 +227,6 @@ static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
return ret ? false : !!res.result[0];
}
-/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
- */
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
-{
- int ret;
- int flags = 0;
- int cpu;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- .arginfo = QCOM_SCM_ARGS(2),
- };
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
-
- ret = qcom_scm_call(__scm->dev, &desc, NULL);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
-}
-EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
-
-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- .arginfo = QCOM_SCM_ARGS(2),
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
-
- return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
-}
-EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
-
-/**
- * qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
- *
- * This is an end point to power down cpu. If there was a pending interrupt,
- * the control would return from this function, otherwise, the cpu jumps to the
- * warm boot entry point set for this cpu upon reset.
- */
-void qcom_scm_cpu_power_down(u32 flags)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
- .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
- .arginfo = QCOM_SCM_ARGS(1),
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
-}
-EXPORT_SYMBOL(qcom_scm_cpu_power_down);
-
int qcom_scm_set_remote_state(u32 state, u32 id)
{
struct qcom_scm_desc desc = {
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 632fe3142462..be23f96557da 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -4,6 +4,24 @@
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
+#include <linux/types.h>
+#include <linux/reset-controller.h>
+
+struct clk;
+struct device;
+
+struct qcom_scm {
+ struct device *dev;
+ struct clk *core_clk;
+ struct clk *iface_clk;
+ struct clk *bus_clk;
+ struct reset_controller_dev reset;
+
+ u64 dload_mode_addr;
+};
+
+extern struct qcom_scm *__scm;
+
enum qcom_scm_convention {
SMC_CONVENTION_UNKNOWN,
SMC_CONVENTION_LEGACY,
@@ -68,11 +86,26 @@ extern int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
__scm_smc_call((dev), (desc), qcom_scm_convention, (res), (atomic))
#define SCM_LEGACY_FNID(s, c) (((s) << 10) | ((c) & 0x3ff))
+#if IS_ENABLED(CONFIG_ARM)
extern int scm_legacy_call_atomic(struct device *dev,
const struct qcom_scm_desc *desc,
struct qcom_scm_res *res);
extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
struct qcom_scm_res *res);
+#else
+static inline int scm_legacy_call_atomic(struct device *dev,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
+{
+ return -EINVAL;
+}
+
+static inline int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
+{
+ return -EINVAL;
+}
+#endif
#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 0165824c5128..0ec905d56e1a 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -64,9 +64,6 @@ enum qcom_scm_ice_cipher {
#if IS_ENABLED(CONFIG_QCOM_SCM)
extern bool qcom_scm_is_available(void);
-extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
-extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
-extern void qcom_scm_cpu_power_down(u32 flags);
extern int qcom_scm_set_remote_state(u32 state, u32 id);
extern int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
@@ -115,11 +112,6 @@ extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
static inline bool qcom_scm_is_available(void) { return false; }
-static inline int qcom_scm_set_cold_boot_addr(void *entry,
- const cpumask_t *cpus) { return -ENODEV; }
-static inline int qcom_scm_set_warm_boot_addr(void *entry,
- const cpumask_t *cpus) { return -ENODEV; }
-static inline void qcom_scm_cpu_power_down(u32 flags) {}
static inline u32 qcom_scm_set_remote_state(u32 state,u32 id)
{ return -ENODEV; }
@@ -171,4 +163,17 @@ static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
{ return -ENODEV; }
#endif
+
+#if IS_ENABLED(CONFIG_ARM) && IS_ENABLED(CONFIG_QCOM_SCM)
+extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern void qcom_scm_cpu_power_down(u32 flags);
+#else
+static inline int qcom_scm_set_cold_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline int qcom_scm_set_warm_boot_addr(void *entry,
+ const cpumask_t *cpus) { return -ENODEV; }
+static inline void qcom_scm_cpu_power_down(u32 flags) {}
+#endif
+
#endif
--
https://chromeos.dev