Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for Chipone ICN6211

[Jagan Teki]

Hi Laurent,

On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > > > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> > > >
> > > > It has a flexible configuration of MIPI DSI signal input and
> > > > produce RGB565, RGB666, RGB888 output format.
> > > >
> > > > Add dt-bingings for it.
> > > >
> > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > ---
> > > > Changes for v3:
> > > > - updated to new dt-bindings style
> > > >
> > > >  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
> > > >  1 file changed, 90 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > new file mode 100644
> > > > index 000000000000..13764f13fe46
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> > > > @@ -0,0 +1,90 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
> > > > +
> > > > +maintainers:
> > > > +  - Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > +
> > > > +description: |
> > > > +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
> > > > +
> > > > +  It has a flexible configuration of MIPI DSI signal input and
> > > > +  produce RGB565, RGB666, RGB888 output format.
> > >
> > > How does one select between the output formats ? Should the output
> > > connection option be described in the device tree ?
> >
> > I think that is a good option to select output formats via dts. what
> > if it makes it a generic property like data-lanes? since it is common
> > across many other bridges.
>
> Describing the output connection in the device tree sounds like a good
> idea indeed. The bus-width property could be used for this, maybe along
> the lines of
> https://lore.kernel.org/dri-devel/20201013020619.GG3942@xxxxxxxxxxxxxxxxxxxxxxxxxx/.

I think this bridge is doing, what we discussed? am I correct?
Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml

>
> If, for a given wiring of the output, different formats could be used,
> then we would need to select them at runtime.

That means the opposite of what mipi_dsi_pixel_format_to_bpp is doing
right? like given bpp we need to select format.

Jagan.